Operation Manual

GoStream Series User Guide
ViewCast 161
Windows Media encoder with digital inputs
To create an encoder, Encoders  All Encoders  Create New Encoder link  Encoder Type = Windows
Media Encoder Driver  Encoder Name field.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. You must configure the video and audio settings for each
encoder type.
Use the Video, Audio, Output, and DRM tabs to edit the settings. Begin with configuring the video and
audio settings then the streaming properties. The streaming properties and advanced streaming settings
are different for each type of encoder.
From the Windows Media Encoder Properties window (Figure 193), you can set the encoder to start
streaming automatically by selecting Auto Start. You can also start this encoder from this window by
clicking the Start Windows Media Encoder link at the top right corner of the window.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.
Figure 193. Windows Media Encoder Properties