Operation Manual

Overview
10 ViewCastMicrosoft
Install overview
You must complete the following primary tasks to install the Niagara system:
1. Address and comply with all prerequisites.
2. Connect the Niagara system using its power source.
3. Connect the video source (camera or video recorder) to the system.
4. Connect the system to an IP network.
5. Configure the Niagara system.
Prerequisites
Before installing and connecting the Niagara system, ensure you comply with the following
prerequisites:
 All packaged items are undamaged and in working order.
 Your environment meets all system requirements.
 Safety instructions, notices, and warnings detailed in Before You Begin including:
o Rack Mount Safety Instructions
o FCC Notice
o Environmental Notices
o Warnings
If any components are missing or damaged, do not continue with the installation. Contact the ViewCast
reseller from which you purchased your GoStream system for assistance in obtaining any missing parts
or for parts replacement.