Operation Manual

GoStream Series User Guide
ViewCast 193
Configuring default directory setting
The system stores audiovisual files when you select the Save to File option in the encoder profile in the
Default AV folder. Refer to the Save to File option under the Flash Encoder Properties (Figure 233)
sections for information on setting an encoder profile to create an audiovisual file.
Note: ViewCast strongly recommends you do not alter the default directory setting unless you
understand the risk of saving your files to a directory not located on drive D. If you save your
files to another drive on the Niagara system, the system could delete the files when you use the
Restore to Factory Defaults feature.
Only drive D on the Niagara system has available storage to save your files. Check the drive
properties for available free space to determine your storage capacity.
Use drives C, E, and F strictly for the Niagara operational programs. Any modifications to these
drives can permanently damage your system and void your warranty.
Figure 233. Default AV Folder field