Operation Manual

Appendix C: Mapped Network Drive Setup
238 ViewCast
To map the network drive:
Note: Create a mapped network drive to the remote shared folder that will reconnect at logon. Once
the mapped drive is created and the GoStream system is rebooted, you will be able to export to
the network drive.
1.
On the Niagara system, open Computer.
2.
Under Tools, select Map Network Drive.
3.
Select a drive.
4.
In the text box for folder, enter the network path to the shared folder on the remote PC
(for example, \\DDSP052206\GSShare).
5.
Make sure Reconnect at logon is enabled.
6.
Select Connect using different credentials.
7.
Click Finish.
Figure 269. Map Network Drive window
8.
Enter SCXUser as the User name and viewcast as the Password.
9.
Click OK.
10.
Click Finish. After a few moments, the network share will open.
11.
Close the window. The mapped drive will now appear in My Computer under Network
Drives.
12.
Reboot the GoStream system.