Operation Manual

Easy Setup
24 ViewCastMicrosoft
13.
Press Stream to move to the Minute field.
14.
Use the Up and Down arrow buttons to increment the numerical value of the minute.
15.
Press Enter to set the format. The confirmation screen displays confirming you have
successfully set up your system.
Figure 10. Confirmation screen
16.
Press Enter to exit the setup menu and reboot the system. The following screen displays
(Figure 11).
Figure 11. Booting screen
Connecting to an IP network
The GoStream has three 1 Gbit network interface ports. The network settings for these ports default to
dynamically obtain an IP address from a DHCP server on the network. If a DHCP server is not available or is
not found on the network, the system assigns its own IP address.
Note: If you are not familiar with network protocols, contact your network administrator for
assistance. If you are not able to browse to the unit with a DHCP network, you may connect to
monitor, keyboard, and mouse to the system to determine and set the network connections.