Operation Manual

Easy Setup
32 ViewCastMicrosoft
7.
If you press a Preset button and no encoder groups are assigned to this button, the no
encoders screen appears (Figure 29).
Figure 29. No encoders screen
Press Enter. The assign an encoder screen appears (Figure 30).
Figure 30. Assign an encoders screen
Note: You must define encoder groups before you can assign them to a Preset button.
8.
Press the Up or Down arrow buttons and select Yes.
9.
Press Enter. The select group screen appears (Figure 31).
Figure 31. Select group screen
10.
Press Enter. A screen with the list of available groups appears (Figure 32).
Figure 32. Group screen
11.
Press the Up or Down arrow buttons to select the appropriate group.
12.
Press Enter. A confirmation screen appears (Figure 33).
Figure 33. Confirmation screen
13.
Press Enter. A group is now assigned to the Preset button.