Operation Manual

GoStream Series User Guide
ViewCast 35
Connecting an external storage device
The GoStream has one USB port on the front panel and six on the back panel. You can connect almost any
standard USB device to any of these ports. You can then export any audiovisual files you may have created
on the system’s local storage drive. The local storage drive is drive D when you use the Save to File setting
from the web interface.
When you insert a USB storage device in one of the USB ports, the system automatically detects the
removable storage device, and assigns a drive letter to the device. This device can capture files directly or
you can use the Export File function on the touch panel menu.
Exporting captured video files
You can export captured video files to an external USB storage device, but first you must set a default
location through the web interface. Refer to Configuring default directory setting before completing the
steps below.
To export captured video files:
1.
Insert a USB storage device into a USB port.
2.
Press Menu on the front panel. The system menu appears.
3.
Press the Up or Down arrow buttons to select Export Files.
Figure 38. System menu
4.
Press Enter. The USB device screen appears (Figure 39).
Figure 39. USB device screen
5.
Press Enter. The destination screens appear with a list of active USB drives (Figure 40).
Figure 40. Destination screens
6.
Press the Up or Down arrow buttons to select the drive destination.