Operation Manual

GoStream Series User Guide
ViewCast 55
Audio tab
Use the following table to configure the audio analog input settings for an Adaptive Apple encoder.
Note: The choices in the drop-down lists may vary.
Figure 69. Audio tab
To configure audio settings:
1.
In the Source field, select an audio source from the drop-down list.
IMPORTANT! The audio input must match the connectors on the back of the system and your
audio source.
2.
Select the Overlay Closed Caption check box to enable overlay closed captions. Field 1 CC 1 is
the default setting.
3.
Select the Format from the drop-down list.
4.
Select the Audio Type from the drop-down list.
5.
Select the Bitrate from the drop-down list.
6.
Select the Audio Encoder from the drop-down list.
7.
Drag the slider to adjust the Left Volume and Right Volume.
8.
(Optional) Select Mute Audio to silence the audio.
9.
Click Save Settings.