Operation Manual

GoStream Series User Guide
ViewCast 65
Output tab
Use the following table to configure the output analog input settings for an Adaptive Adobe Flash
dynamic streaming encoder.
Note: The choices in the drop-down lists may vary.
Figure 81. Output tab
To configure output settings:
1.
Select Stream to Flash Media Server.
CAUTION! Simultaneously publishing to server and file system increases CPU usage.
2.
Enter the destination FMS Address.
Note: The Stream Path that displays is a combination of the FMS (Flash media Server)
address and the stream name.
3.
Enter the Stream Name.
Note: The system accepts the %v parameter for video bitrate, %i for indexing, and %b for
overall bitrate, which is compatible with Adobe Flash media encoder.
4.
Select Stream to File System to enable archiving content to the file system.