Operation Manual

Analog Inputs
74 ViewCast
Output tab
Use the following table to configure the output analog input settings for an Adaptive Microsoft Smooth
Streaming encoder.
Note: The choices in the drop-down list may vary.
Figure 92. Output tab
To configure output settings:
1.
Select Publish to IIS Host.
2.
Enter the destination Host Address.
Note: The Stream Path that displays is a combination of the host address and the publish
point.
3.
Enter the Publish Point.
4.
Select PlayReady DRM to enable Digital Rights Management support. PlayReady requires
external License Server provider support. The URL and the seed must be acquired from the
license hosting provider.
5.
Select the Key URL:
 http://
 https://
6.
Enter the PlayReady key URL.
7.
Click Create to generate a unique Key ID.
8.
Enter the Key Seed.
9.
Click Stream to File System.
10.
Accept the default location that displays in the Folder field or choose your own location for
the file. To choose your own personal location select the link (horizontal ellipses or … ) to the
right of the Folder field and display the options (Figure 93).
Note: By default, the system sets this folder to D:\AVFiles. See Export to USB drive for