Operation Manual

Chapter 9: MPEG-4 Options and Settings
60 ViewCast
Figure 81. Insert, Encoder Option
The system displays a set of options (Figure 82) for the type of encoder you want to create.
Figure 82. Encoder Options List
3. Click MPEG4 Encoder Driver. Then, click OK. The system displays the New Encoder window
Figure 83.
Figure 83. MPEG4 Encoder Driver Selection
Table 22. MPEG-4 Encoder Tabs
Tab
Description
Auto/Name
 Set the name for the encoder and click the option to Automatically Start
Device at Service Startup (Figure 84).
 The encoder starts when Niagara SCX service starts if you select auto start.
 The Located On field provides the machine name where the encoder resides.
 The window now lists MPEG-4 as an available encoder.