C-PF-0618 AHEAD OF THE FLOW ® Plastic Fittings
Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers. NIBCOpartner.
AHEAD OF THE www.nibco.com F L O W® Revised 12/01/2021 Visit our website for the most current information. Table Of Contents Numerical Index........................................................................................................................................4 Material Selection.....................................................................................................................................6 Key to NIBCO Figure Numbers...............................................
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Numerical Index ABS & PVC-DWV ABS-DWV FIG. NO. 5800 5800-SD 5801 5801-2-7 5801-2-7-B 5801-2-7-C 5801-2-F 5801-7 5801-7-B 5801-7-C 5801-RP 5803 5803-2 5803-2-F 5803-2-SW 5803-2-SW-EL 5803-TPA 5803-2-TPA 5804 5804-2 5805 5805-N 5806 5806-2 5807 5807-2 5807-2-CL 5807-2-LT 5807-2-V 5807-3 5807-9 5807-CL 5807-LT 5807-V 5808 5808-2 5810 5810-14 5810-2 5811 5811-14-V 5811-2 5811-C 5811-V 5812-LR 5814 5816 5817 4 CPVC-CTS PVC-DWV FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Numerical Index PVC SCH-40 PVC SCH-80 UNIV. PART NO. FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Material Selection Thermoplastic and Elastomers ABS (Acrylonitrile-butadiene-styrene) Class 3-2-2-2-2, conforming to ASTM D3965, is a time proven material. The smooth inner surface and superior resistance to deposit formation makes ABS drain, waste and vent material ideal for residential and commercial sanitary systems. The residential DWV system can be exposed in service to a wide temperature span.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Material Selection Plastic Piping Standards ASTM Test Properties Material Methods ABS PVC 3-2-2-2-2 12454 General Specific Gravity 1.00 - 1.08 1.38 D792 D570 Mechanical D638 CPVC 23447 1.55 Water Absorption % 24 Hrs. @ 73°F 0.3 0.05 0.05 Tensile Strength psi @ 73°F 4,500 7,000 7,000 ASTM Standard D1784 This standard covers PVC and CPVC compounds used in the manufacture of plastic pipe, valves, and fittings.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Material Selection Plastic Piping Standards and Chemical Resistance ASTM Standard F1970 IAPMO (International Association of Plumbing and This standard covers fittings and appurtenances intended to be Mechanical Officials) used in PVC or CPVC plastic piping, or as a transition from such systems to metal systems. These products, such as unions, flanges, or valves, are not included in the scope of other ASTM specifications.
AHEAD OF THE www.nibco.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Methods of Designating Inlets of Fittings DWV 90° Ell w/Side Inlet DWV 90° Ell w/High Heel Inlet DWV Sanitary Tee DWV Tee w/90° Right/Left Inlet DWV Double Sanitary Tee DWV Double Tee w/Two 90° Side Inlets DWV Double Tee w/One 90° Side Inlet Cross DWV 45° Y DWV 45° Double Y General Note: The largest opening establishes the basic size of a reducing fitting.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings Adapters................................................................................................................................................ 12 Bushings................................................................................................................................................ 15 Caps.................................................................................................................
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ADAPTERS 5800 4800 Soil Pipe Adapter (Hub x Hub) NOM. SIZE 2 3 4 5800-SD 4800-SD 5801-2-7 4801-2-7 5801-2-7-C 4801-2-7-C 5801-7 4801-7 PVC APPROX. NET WT./LBS. .301 .708 .834 1.158 Sewer & Drain Adapter (Hub x Sewer & Drain) NOM. SIZE 3x4 ABS APPROX. NET WT./LBS. .362 NOM. SIZE 11/4 11/2 11/2 x 11/4 2 ABS APPROX. NET WT./LBS. .085 .094 .084 .126 PVC APPROX. NET WT.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ADAPTERS (Continued) 5801-7-C 4801-7-C Trap Adapter (Hub x SJ w/Chrome Nut) 5803 4803 Adapter (Hub x FIPT) NOM. SIZE 11/2 11/2 x 11/4 NOM. SIZE 11/4 11/2 2 3 4 6 5803-2 4803-2 5803-2-F 4803-2-F ABS APPROX. NET WT./LBS. .120 .110 ABS APPROX. NET WT./LBS. .066 .078 .096 .345 .552 1.282 Adapter (Spg x FIPT) NOM. SIZE 11/4 11/2 2 3 4 6 ABS APPROX. NET WT./LBS. .051 .070 .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ADAPTERS (Continued) 5803-2-SW Swivel Adapter (Spg x FIPT) 5803-2-SW-EL Swivel Adapter (Spg x FIPT) 5803-TPA Tray Plug Adapter (Hub x NPSM Thread) 5803-2-TPA Tray Plug Adapter (Spg x NPSM Thread) 5804 4804 Adapter (Hub x MIPT) NOM. SIZE * 11/2 NOM. SIZE * 11/2 NOM. SIZE * 11/2 NOM. SIZE * 11/2 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ADAPTERS (Continued) 5804-2 4804-2 Adapter (Spg x MIPT) 5805 4805 Soil Pipe Adapter (Hub x Spg) NOM. SIZE 11/4 11/2 11/2 x 11/4 2 3 4 NOM. SIZE 11/2 x 2 * 113/16 x 3 2 †2x3 3 3x4 4 5805-N 4805-N ABS APPROX. NET WT./LBS. .058 .063 .058 .084 .282 .454 PVC APPROX. NET WT./LBS. .075 .089 .078 .113 .385 .609 DIM. A INCHES 121/32 121/32 121/32 113/16 31/2 37/8 ABS APPROX. NET WT.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC CAPS 5817 4817 Cap (Hub) NOM. SIZE 11/4 11/2 2 3 4 *6 †8 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .074 .089 .118 .317 .568 1.150 .07 .115 .169 .469 .789 N/A N/A N/A DIM. A INCHES 7/8 7/8 31/32 123/32 2 31/16 N/A 6" and 8" PVC cap available in Schedule 40 PVC only as Universal Fig. No. 447-XXX. See page 53. 5817-P Test Cap (Polystyrene) NOM.
www.nibco.com AAHHEEAADD O OFF TTHHEE FFLLO OW W®® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC COUPLINGS 5801 4801 Coupling (Hub x Hub) NOM. SIZE ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .052 .065 .072 .084 .102 .344 .285 .297 .574 .569 .493 1.541 N/A N/A N/A .075 .090 .100 .119 .132 .466 .397 .418 .755 .784 .690 1.541 5.100 8.533 1/8 1/8 13/32 1/8 23/32 3/16 7/8 13/32 1/4 15/16 13/8 1/4 1/4 1/2 14.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ELBOWS (Continued) 5806-2 4806-2 45° Street Ell (Spg x Hub) NOM. SIZE 11/4 11/2 2 3 4 6 †8 †8x6F †8x4F 5807 4807 ABS APPROX. NET WT./LBS. .100 .134 .201 .601 1.048 2.772 N/A N/A PVC APPROX. NET WT./LBS. .136 .174 .277 .818 1.464 3.950 5.738 6.500 N/A 6.200 90° Ell (Hub x Hub) NOM. SIZE 11/4 11/2 2 3 4 6 †8 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .122 .149 .248 .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ELBOWS (Continued) 5807-V 4807-V 90° Vent Ell (Hub x Hub) NOM. SIZE * 11/4 11/2 2 3 4 10 12 5807-2 4807-2 NOM. SIZE NOM. SIZE 11/2 2 3 4 5807-2-V 4807-2-V ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .120 .154 .240 .731 1.224 3.319 .164 .200 .313 .993 1.731 4.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ELBOWS (Continued) 5807-3 4807-3 90° Ell (Hub x FIPT) NOM. SIZE 3 5807-9 4807-9 5808 4808 1.101 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. DIM. A INCHES 3x3x2 3 x 3 x 11/2 .780 .764 1.127 1.070 3 3 221⁄2° Ell (Hub x Hub) NOM. SIZE ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .099 .156 .448 .825 2.172 .131 .195 .637 1.132 3.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC ELBOWS (Continued) 5860 4860 60° Ell (Hub x Hub) NOM. SIZE 11/2 2 3 4 5860-2 4860-2 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .128 .190 .564 1.042 .172 .256 .806 1.434 60° Street Ell (Spg x Hub) NOM. SIZE 11/2 2 3 4 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .119 .182 .570 .165 .250 .855 1.012 1.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. FLANGES 5848-A 4848-A Offset Adjustable Closet Flange w/Plastic Coated Steel Flange (Hub) NOM. SIZE 4x3 5851 4851 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .903 1.137 Closet Flange (Hub) NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC FLANGES (Continued) 5851-3 4851-3 Closet Flange (FIPT) NOM. SIZE 4x3 5851-4 4851-4 PVC APPROX. NET WT./LBS. .583 .666 Closet Flange (MIPT) NOM. SIZE 4x3 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .430 .668 DIM. A INCHES DIM. B INCHES 7/16 25/16 DIM. A INCHES DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC NIPPLES 5829 Nipples 3" (MIPT x MIPT) NOM. SIZE 5829-2 ABS APPROX. NET WT./LBS. DIM. A INCHES *3 .272 3 *4 .393 4 *6 .595 6 *8 .847 8 * 10 1.092 10 * 12 1.274 12 Nipples 3" (MIPT x Plain End) NOM. SIZE ABS APPROX. NET WT./LBS. *3 *4 *6 *8 * 10 .315 .425 .670 .897 1.115 DIM. A INCHES 3 4 6 8 10 PLUGS 5818 4818 Plug (MIPT) NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 1/25/2022 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC RETURN BENDS 5878 4878 Return Bend (Hub x Hub x Cleanout w/Plug) NOM. SIZE 11/2 2 5879 4879 ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. .259 .454 .366 .643 Return Bend (Hub x Hub) NOM. SIZE 11/2 2 3 4 ABS APPROX. NET WT./LBS. .231 .437 1.151 2.255 DIM. A INCHES 31/4 5 PVC APPROX. NET WT./LBS. .333 .620 1.632 3.083 DIM. B INCHES 13/8 21/4 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC TEES (Continued) 5811-C 4811-C Two-Way Cleanout Tee (Hub x Hub x Hub) 5811-V 4811-V Vent Tee (Hub x Hub x Hub) 5811-2 4811-2 NOM. SIZE 3 4 NOM. SIZE ABS APPROX. NET WT./LBS. 11/2 2 3 * 3 x 3 x 11/2 *3x3x2 4 10 12 .171 .245 .756 .545 .598 1.397 N/A N/A PVC APPROX. NET WT./LBS. 1.920 3.323 DIM. A DIM. B INCHES INCHES 81/8 41/16 7 9 /8 415/16 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC TEES (Continued) 5811-14-V 4811-14-V Test Tee (Hub x Hub x FIPT w/o plug) 5814 4814 Test Tee (Hub x Hub x Cleanout w/Plug) 5835 4835 Double Sanitary Tee (All Hub) 5835-B 4835-B Double Fixture Tee (All Hub) 5835-9 4835-9 Double Sanitary Tee w/One-90° Side Inlet (All Hub) NOM. SIZE 11/2 2 3 4 ABS APPROX. NET WT./LBS. .178 .252 .718 1.355 NOM. SIZE 11/2 2 3 4 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 3/17/2021 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC TEES (Continued) 5835-9-9 4835-9-9 Double Sanitary Tee w/Two-90° Side Inlets (All Hub) 5870 4870 Sanitary Tee w/90° Right & Left Inlets (All Hub) 5871 4871 Sanitary Tee w/90° Left Inlet (All Hub) 5872 4872 Sanitary Tee w/90° Right Inlet (All Hub) NOM. SIZE 3x3x3x3x2x2 4x4x4x4x2x2 ABS APPROX. PVC APPROX. DIM. A NET WT./LBS. NET WT./LBS.INCHES 1.549 2.063 47/8 2.477 3.329 61/8 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC TRAPS (Continued) 5885 4885 P-Trap (Hub x Hub) 4885-WB Washer Box P-Trap (Hub x Hub) 5891 4891 Swivel Drum Trap (Hub x Hub x Cleanout w/Plug) 5892 4892 P-Trap w/Union Joint (Hub x SJ) 5892-C 4892-C P-Trap w/Union Joint (Hub x SJ w/Chrome Nut) NOM. SIZE 11/2 2 3 4 ABS APPROX. PVC APPROX. DIM. A NET WT./LBS. NET WT./LBS. INCHES .377 .514 31/4 .661 .923 5 1.748 2.474 65/16 3.479 4.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC TRAPS (Continued) 5893 4893 P-Trap w/Union Joint L.A. Pattern (Hub x SJ) 5895 4895 P-Trap w/Union Joint (Hub x Hub) NOM. SIZE 11/2 or 11/2 x 11/4 NOM. SIZE 11/4 11/2 2 ABS APPROX. PVC APPROX. DIM. A DIM. B NET WT./LBS. NET WT./LBS. INCHES INCHES .485 .666 31/4 35/8 DIM. C INCHES 31/2 DIM. D INCHES 41/2 DIM. C INCHES 35/8 35/8 5 DIM. D INCHES 45/8 13 4 /16 71/4 DIM. A DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC WYES 5810 4810 45° Wye (Hub x Hub x Hub) NOM. SIZE 11/4 11/2 2 2 x 2 x 11/2 2 x 1/2 x 11/2 3 3x3x2 3 x 3 x 11/2 4 4x4x3 4x4x2 4 x 4 x 11/2 6 6x6x4 6x6x3 †8 †8x8x6 †8x8x4 WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. ABS APPROX. NET WT./LBS. .220 .264 .
AHEAD OF THE www.nibco.com F L O W® Revised 12/20/2021 ABS & PVC-DWV Fittings 5800 Series ABS/4800 Series PVC WYES (Continued) 5810-2 4810-2 45° Street Wye (Spg x Hub x Hub) NOM. SIZE ABS APPROX. NET WT./LBS. PVC APPROX. NET WT./LBS. * 11/2 2 3 3x3x2 † 3 x 3 x 11/2 4 4x4x3 †4x4x2 .258 .414 1.199 .827 .725 2.183 1.678 N/A N/A .567 .595 1.158 1.015 3.056 2.349 1.768 DIM. A INCHES DIM. B INCHES DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings ADAPTERS 4703 Female Adapter w/Washer (Slip x FIPT) 4704 Male Adapter (Slip x MIPT) NOM. SIZE 1/2 3/4 1 NOM. SIZE 1/2 3/4 1 11/4 11/2 2 APPROX. DIM. A NET WT./LBS. INCHES .026 3/4 .039 25/32 .065 29/32 APPROX. DIM. A NET WT./LBS. INCHES .023 7/8 .035 7/8 .060 11/16 .104 11/16 .155 11/8 .285 13/16 BUSHINGS 4718 Bushing (Spg x Slip) NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings BUSHINGS (Continued) 4718-T Transition Bushing (Spigot IPS x Slip CTS) NOM. SIZE 1 (IPS) x 1 (CTS) 11/4 (IPS) x 11/4 (CTS) 11/2 (IPS) x 11/2 (CTS) 2 (IPS) x 2 (CTS) APPROX. NET WT./LBS. .030 .057 .070 .111 DIM. A INCHES 9/32 1/4 3/16 1/8 CAPS 4717 Cap (Slip) A NOM. SIZE 1/2 3/4 1 11/4 11/2 2 APPROX. DIM. A NET WT./LBS. INCHES .012 1/8 .019 1/8 .034 5/16 .061 7/16 .100 1/2 .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings ELBOWS 4706 45° Ell (Slip x Slip) 4706-2 45° Street Ell (Spg x Slip) 4707 90° Ell (Slip x Slip) NOM. SIZE 1/2 3/4 1 11/4 11/2 2 NOM. SIZE 1/2 3/4 1 NOM. SIZE 1/2 3/4 3/4 x 1/2 1 11/4 11/2 2 APPROX. DIM. A NET WT./LBS. INCHES .020 3/16 .036 1/4 .077 5/16 .108 11/32 .174 13/32 .382 1/2 APPROX. DIM. A NET WT./LBS. INCHES .018 3/16 .032 1/4 .074 5/16 APPROX. DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings ELBOWS (Continued) 4707-5 90° Drop Ear Ell (Slip x Slip) NOM. SIZE 1/2 APPROX. NET WT./LBS. .036 DIM. A INCHES 13/32 STRAPS 4724 “Snap-On” Strap (Polypropylene) NOM. SIZE 1/2 3/4 APPROX. NET WT./LBS. .003 .004 Do not use or test the products in this catalog with compressed air or other gasses. FlowGuard Gold ® is a registered trademark of The Lubrizol Corporation. NIBCO INC.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings TEES 4711 Tee (Slip x Slip x Slip) NOM. SIZE 1/2 3/4 3/4 x 3/4 x 1/2 3/4 x 1/2 x 3/4 3/4 x 1/2 x 1/2 1 1 x 1 x 3/4 11/4 11/2 11/2 x 11/2 x 1 2 2x2x1 APPROX. DIM. A NET WT./LBS. INCHES .034 13/32 .063 17/32 .045 13/32 .053 17/32 .042 13/32 .100 21/32 .084 17/32 .174 25/32 .284 29/32 .215 21/32 .636 15/32 .421 21/32 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings TRANSITION FITTINGS 4707-3-5-SI A B Lead-Free 90° Drop Ear Ell (CPVC Slip x Stainless Steel FIPT) NOM. APPROX. DIM. A SIZE NET WT./LBS. INCHES *1/2 .218 .925 *This product NOT made from FlowGuard Gold® material DIM. B INCHES .925 DIM. C INCHES 1.38 APPROX. NET WT./LBS. .020 .034 DIM. A INCHES 17/16 17/16 C 4732-2 Compression Fitting (SPG) NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Pressure Fittings TRANSITION UNIONS 4733-LF Union (CPVC Slip x Copper Silicon Alloy Solder) 4733-3-LF Union (CPVC Slip x Copper Silicon Alloy FIPT) 4733-4 Union (CPVC Slip x Copper MIPT) 4733-7-LF Union (CPVC Slip x Copper Silicon Alloy Compression) NOM. SIZE 1/2 3/4 NOM. SIZE 1/2 3/4 1 NOM. SIZE 1/2 1/2 x 3/4 3/4 NOM.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 PVC Schedule 40 Pressure Fittings Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 & 54 Bushings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings TEES 4611 Tee (Slip x Slip x Slip) 4611 Reducing Tee (Slip x Slip x Slip) UNIV. FIG. NO. 401-005 401-007 401-010 401-012 401-015 401-020 401-025 401-030 401-040 401-050 401-060 401-080 UNIV. FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings TEES (Continued) 4611 Reducing Tee (Slip x Slip x Slip) (continued) 4612 Tee (Slip x Slip x FIPT) UNIV. FIG. NO. 401-287 401-288 401-289 401-290 401-291 401-292 401-333 401-334 401-335 401-336 401-337 401-338 401-416 401-417 401-419 401-420 401-422 401-528 401-530 401-532 401-582 401-585 UNIV. FIG. NO. 402-005 402-007 402-010 402-012 402-015 402-020 402-030 402-040 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings TEES (Continued) 4612 Reducing Tee (Slip x Slip x FIPT) UNIV. FIG. NO. 402-074 402-094 402-101 402-124 402-125 402-130 402-131 402-156 402-157 402-158 402-166 402-167 401-168 402-199 402-201 402-202 402-209 402-210 402-211 402-212 402-239 402-247 402-248 402-249 402-251 402-288 402-333 402-334 402-335 402-337 402-338 402-419 402-420 402-422 4612-3-3 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings ELBOWS 4607 90° Ell (Slip x Slip) UNIV. FIG. NO. 406-005 406-007 406-010 406-012 406-015 406-020 406-025 406-030 406-040 406-050 406-060 406-080 NOM. SIZE 1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 *6 8 APPROX. NET WT./LBS. .047 .073 .105 .188 .240 .375 .869 1.189 2.100 5.000 4.245 14.585 DIM. A INCHES 1/2 9/16 11/16 7/8 1 11/4 11/2 113/16 25/16 31/4 31/2 49/16 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings ELBOWS (Continued) 4607-3-3 90° Ell (FIPT x FIPT) 4607-2 90° Street Ell (Spg x Slip) 4607-4 90° Street Ell (MIPT x Slip) 4607-2-3 90° Street Ell (Spg x FIPT) 4607-3-4 90° Street Ell (MIPT x FIPT) UNIV. FIG. NO. 408-005 408-007 408-010 408-012 408-015 408-020 UNIV. FIG. NO. 409-005 409-007 409-010 409-012 409-015 409-020 UNIV. FIG. NO. 410-005 410-007 410-010 410-012 410-015 410-020 UNIV. FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 9/16/2021 PVC Schedule 40 Pressure Fittings ELBOWS (Continued) 4607-9 90° Ell w/Side Outlet (Slip x Slip x Slip) 4607-9-3 90° Ell w/Side Outlet (Slip x Slip x FIPT) 4606 45° Ell (Slip x Slip) UNIV. FIG. NO. 413-005 413-007 413-010 413-015 413-020 UNIV. FIG. NO. 414-005 414-101 414-130 UNIV. FIG. NO. 417-005 417-007 417-010 417-012 417-015 417-020 417-025 417-030 417-040 417-050 417-060 417-080 NOM. SIZE 1/2 3/4 1 11/2 2 APPROX. NET WT./LBS. .
AHEAD OF THE www.nibco.com F L O W® Revised 9/16/2021 PVC Schedule 40 Pressure Fittings COUPLINGS 4601 Coupling (Slip x Slip) 4601-3-3 Coupling (FIPT x FIPT) UNIV. FIG. NO. 429-005 429-007 429-010 429-012 429-015 429-020 429-025 429-030 429-040 429-050 429-060 429-080 429-100 429-120 UNIV. FIG. NO. 430-005 430-007 430-010 430-073 NOM. SIZE 1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 6 8 10 12 NOM. SIZE 1/2 3/4 1 1/2 x 3/8 APPROX. NET WT./LBS. .032 .049 .080 .121 .149 .200 .648 .570 .919 1.933 2.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings ADAPTERS (Continued) 4603 Female Adapter (Slip x FIPT) 4603 Reducing Female Adapter (Slip x FIPT) 4604 Male Adapter (MIPT x Slip) UNIV. FIG. NO. 435-005 435-007 435-010 435-012 435-015 435-020 435-025 435-030 435-040 435-050 435-060 435-080 UNIV. FIG. NO. 435-074 435-075 435-101 435-102 435-131 UNIV. FIG. NO. 436-005 436-007 436-010 436-012 436-015 436-020 436-025 436-030 436-040 436-060 436-080 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings ADAPTERS (Continued) 4604 Reducing Male Adapter (MIPT X Slip) UNIV. FIG. NO. 436-074 436-101 436-102 436-130 436-131 436-132 436-168 436-169 436-212 436-213 436-251 436-252 NOM. SIZE 1/2 x 3/4 3/4 x 1/2 3/4 x 1 1 x 1/2 1 x 3/4 1 x 11/4 11/4 x 1 1 1 /4 x 11/2 11/2 x 11/4 11/2 x 2 2 x 11/2 2 x 21/2 APPROX. NET WT./LBS. .039 .029 .064 .046 .049 .099 .112 .157 .107 .173 .154 .525 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings BUSHINGS (Continued) 4618 4618-3 Bushing (Spg x Slip) (continued) UNIV. FIG. NO. 437-335 437-336 437-337 437-338 437-339 437-420 437-421 437-422 437-488 NOM. SIZE 3x1 3 x 11/4 3 x 11/2 3x2 3 x 21/2 4x2 4 x 21/2 4x3 5x3 437-490 437-528 437-530 437-532 437-534 437-582 437-585 5x4 6x2 6x3 6x4 6x5 8x4 8x6 APPROX. NET WT./LBS. .655 .736 .688 .417 .337 .680 1.145 .773 1.250 1.270 3.275 2.000 2.169 2.600 4.250 4.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings BUSHINGS (Continued) 4618-3 Bushing (Spg x FIPT) (continued) 4618-3-4 Bushing (MIPT x FIPT) UNIV. FIG. NO. 438-247 438-248 438-249 438-250 438-251 438-289 438-291 438-292 438-335 438-337 438-338 438-339 438-420 438-421 438-422 438-490 438-532 UNIV. FIG. NO. 439-072 439-098 439-101 439-130 439-131 439-166 439-167 439-168 439-209 439-210 439-211 439-212 439-249 439-250 439-251 439-338 NOM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings CAPS 4617 Cap (Slip) UNIV. FIG. NO. 447-005 447-007 447-010 447-012 447-015 447-020 447-025 447-030 447-040 447-050 447-060 447-080 NOM. SIZE 1/2 3/4 1 11/4 11/2 2 21/2 3 4 5 6 8 APPROX. NET WT./LBS. .022 .034 .055 .095 .115 .169 .405 .469 .789 2.000 1.940 3.900 DIM. A INCHES 7/32 7/32 1/4 1/4 1/4 9/32 11/32 15/16 1 3/32 15/16 1 3/4 1 3/8 Consult Customer Service to determine if caps are flat or domed.
AHEAD OF THE www.nibco.com F L O W® Revised 3/10/2020 PVC Schedule 40 Pressure Fittings PLUGS (Continued) 4616-4 Plug (MIPT) UNIV. FIG. NO. 450-002 450-005 450-007 450-010 450-012 450-015 450-020 450-025 450-030 450-040 NOM. SIZE 1/4 1/2 3/4 1 11/4 11/2 2 21/2 3 4 APPROX. NET WT./LBS. .007 .020 .030 .070 .108 .160 .220 .340 .495 .560 DIM. A INCHES 23/32 11/16 13/32 11/4 11/8 125/32 115/16 23/32 213/32 213/16 APPROX. NET WT./LBS. .040 .180 .200 .500 DIM.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pressure Fittings TRAPS Running Trap (Spg x Spg) UNIV. FIG. NO. 488-007 NOM. SIZE 3/4 P-Trap (Spg x Spg) UNIV. FIG. NO. 489-007 NOM. SIZE 3/4 APPROX. NET WT./LBS. .225 APPROX. NET WT./LBS. .225 DIM. A INCHES 17/8 DIM. A INCHES 2 DIM. B INCHES 111/8 DIM. B INCHES 41/32 DIM. C INCHES 85/8 VALVES 4660-S/4660-T PVC Ball Valve (Slip x Slip or FIPT x FIPT) NOM. SIZE 1/2 3/4 1 11/4 11/2 2 21/2 3 4 APPROX. NET WT./LBS. .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Plastic Irrigation Products PVC SCHEDULE 40 BALL VALVES NIBCO® PVC Schedule 40 Ball Valves are excellent for use in cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. Sizes range from 1/2" through 4" IPS. These valves feature a durable one-piece molded body, convenient quarter-turn action, and their 100 percent thermoplastic design eliminates process or atmospheric corrosion.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 PVC Schedule 80 Pressure Fittings Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Bushings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Tees Chemtrol Fig. No. Chemtrol Fig. No. 4511 Socket Tee (S x S x S) 4512 Socket x Thread Tee (S x S x FPT) H I G Nominal Universal Approx. Size Part No. Lbs./Ea. 1/4 801-002 0.05 1/2 801-005 0.11 3/4 801-007 0.17 1 801-810 0.25 1 1/4 801-012 0.48 1 1/2 801-015 0.52 2 801-020 0.97 2 1/2 801-025 1.50 3 801-030 2.00 4 801-040 3.54 6 801-060 10.47 8 801-080 20.57 10 801-100 35.
www.nibco.com AAHHEEAADD O OFF TTHHEE FFLLO OW W®® Revised Revised 4/26/2019 4/26/2019 PVC Schedule 80 Elbows Chemtrol Fig. No. Chemtrol Fig. No. 4507 Socket 90° ELL (S x S) 4507-3-3 Thread 90° ELL (FPT x FPT) H G G H Nominal Universal Approx. Size Part No. Lbs./Ea. 1/4 806-002 0.01 1/2 806-005 0.11 3/4 806-007 0.16 1 806-010 0.21 1 1/4 806-012 0.25 1 1/2 806-015 0.38 2 806-020 0.57 2 1/2 806-025 1.16 3 806-030 1.50 4 806-040 3.08 6 806-060 8.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Chemtrol Fig. No. Chemtrol Fig. No. 4506-3-3 Thread 45° ELL (FPT x FPT) 4501-R Reducing Socket Coupling (S x S) K K Nominal Universal Approx. Size Part No. Lbs./Ea. 1/4 819-002 0.04 1/2 819-005 0.11 3/4 819-007 0.13 1 819-010 0.25 1 1/4 819-012 0.35 1 1/2 819-015 0.48 2 819-020 0.71 2 1/2 819-025 1.03 3 819-030 1.53 4 819-040 2.52 Dim. K 0.82 1.15 1.35 1.51 1.70 1.86 2.13 2.46 2.69 3.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Chemtrol Fig. No. Chemtrol Fig. No. 4501-3-3-R Reducing Thread Coupling (FPT x FPT) 4504 Male Adapter (S x MPT) Nominal Universal Approx. Size Part No. Lbs./Ea. 3/4 x 1/2 830-101 0.14 1 x 1/2 830-130 0.20 1 x 3/4 830-131 0.18 1 1/4 x 3/4 830-167 0.29 1 1/4 x 1 830-168 0.31 1 1/2 x 3/4 830-210 0.35 1 1/2 x 1 830-211 0.38 1 1/2 x 1 1/4 830-212 0.40 2 x 1 830-249 0.50 2 x 1 1/2 830-251 0.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Bushings Design Styles The design style of most bushings is to have a solid wall between the Chemtrol Fig. No. inside and outside connections. Some of the multistep reductions with exceedingly thick cross-sections are not solid. This design style achieves structural support with a web of ribs attaching the inner and outer connection walls, with the open area toward the exterior bushing face.
www.nibco.com AA HH EE AA DD O O FF TT HH EE FF LL O OW W®® Revised Revised 4/26/2019 4/26/2019 PVC Schedule 80 Caps Chemtrol Fig. No. Chemtrol Fig. No. 4518-3-4 Flush Thread Reducer Bushing (MPT x FPT) LL Nominal Size 1/2 x 1/4 3/4 x 1/4 3/4 x 1/2 1 x 1/2 1 x 3/4 1 1/4 x 1/2 1 1/4 x 3/4 1 1/4 x 1 1 1/2 x 1/2 1 1/2 x 3/4 1 1/2 x 1 1 1/2 x 1 1/4 2 x 1/2 2 x 3/4 2 x 1 2 x 1 1/4 2 x 1 1/2 2 1/2 x 2 3 x 1 1/2 3 x 2 3 x 2 1/2 4 x 2 4 x 3 Universal Part No.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Plugs Chemtrol Fig. No. Chemtrol Fig. No. 4516-4 Thread Plug (MPT) 4551-H Socket Flange (S), One-Piece (Solid) LL Nominal Size 1/4 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 Universal Part No. 850-002 850-005 850-007 850-010 850-012 850-015 850-020 850-025 850-030 850-040 Approx. Lbs./Ea. 0.01 0.03 0.03 0.06 0.10 0.14 0.19 0.29 0.51 0.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Chemtrol Fig. No. Chemtrol Fig. No. 4551-H-3 Thread Flange (FPT), One-Piece (Solid) 4519-H Blind Flange, One-Piece (Solid) G 1° Nominal Size 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 Universal Part No. 852-H05 852-H07 852-H10 852-H12 852-H15 852-H20 852-H25 852-H30 852-H40 OF G 1° Approx. Lbs./Ea. 0.21 0.30 0.40 0.50 0.65 0.90 1.50 1.93 2.80 Dim. G 0.54 0.61 0.68 0.73 0.82 0.92 1.02 1.13 1.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Chemtrol Fig. No. Chemtrol Fig. No. Van Stone Flange Assembly List Item 1 2 3 Description Connector Hub Flange Ring Flange Ring Material PVC PVC Coated Aluminum PVC NR 51 Flange Gaskets, for Class 150 Flanges Note: These gaskets are 1/8" thick, full face CR, 70 durometer. Nominal Part Size No. 1/2 3/4 1 1 1/4 1 1/2 2 Use 2 1/2 Figure No. 3 & Nom.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Transition Unions Chemtrol Fig. No. Chemtrol Fig. No. 4533-3-3 FKM / 4533E-3-3 (EPDM) Threaded Union (FPT x FPT) L TCBR-3 Brass End Connector (FPT) 1 4 Nominal Size 1/4 1/2 3/4 1 1 1/4 1 1/2 2 3 FKM Part No. 858-002 858-005 858-007 858-010 858-012 858-015 858-020 858-030 EPDM Part No. 898-002 898-005 898-007 898-010 898-012 898-015 898-020 898-030 T 2 A T T Approx. Lbs./Ea. 0.11 0.
AHEAD OF THE F L O W® www.nibco.com Engineering Data Pressure Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 ABS & PVC-DWV Pipe & Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 CPVC-CTS Copper Tube Size (SDR 11) Tube and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 PVC Schedule 40 Pipe & Pressure Fittings . . .
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Pressure Ratings Fittings with Service Correction Factors Pipe and Tube 1Based on water service, for more severe service, an additional correction factor may be required.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Pressure Ratings (Continued) Fittings Temperature Correction Factors Operating Temperature, °F PVC 70 1.00 80 0.90 90 0.75 100 0.62 110 0.50 120 0.40 130 0.30 140 0.22 150 N.R. 160 N.R. 170 N.R. 180 N.R. 200 N.R. 210 N.R. N.R. - Not Recommended. FACTORS CPVC-CTS 1.00 0.96 0.92 0.85 0.77 0.70 0.55 0.50 0.47 0.40 0.32 0.25 0.18 0.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS & PVC-DWV Pipe & Fittings NIBCO® ABS 5800 series fittings conform to the material and dimensions of ASTM D2661 and D3311. ABS pipe meets the material requirements of ASTM D3965 and the dimensions of ASTM D2661. ABS & PVC Schedule 40 Pipe Dimensions Nominal Size 11/4 11/2 2 3 4 6 8* 10* 12* NIBCO® PVC 4800 series fittings are manufactured to meet the material and dimensional requirements of ASTM D2665 and D3311.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 CPVC-CTS Copper Tube Size (SDR 11) Tube and Fittings Dimensions and Pressure Ratings NIBCO® CPVC-CTS fittings are manufactured to the material and dimensional requirements of ASTM D2846. Each product can be easily identified by the tan color. The outside diameter of the tube has the same dimension as the equivalent size copper tube; therefore, the product line is referred to as CPVC-CTS (Copper Tube Size).
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 40 Pipe & Pressure Fittings PVC Schedule 40 pipe and fittings are made for use in cold water systems where the temperature does not exceed 140°F. PVC Schedule 40 fittings are made in compliance with ASTM D2466. Schedule 40 pipe meets the requirements of ASTM D1785. Both the pipe and fittings are manufactured from material conforming to ASTM D1784 and meeting cell Class 12454. Schedule 40 *Pipe Dimensions and References (20 ft.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC Schedule 80 Pipe & Pressure Fittings NIBCO®/Chemtrol® grey PVC Schedule 80 fittings are manufac- Schedule 80 tured to applicable national standards, such as, ASTM D2467, for Pipe Dimensions threaded and socket-type fittings. Schedule 80 pipe meets the dimensional requirements of ASTM D1785. Both Schedule 80 pipe and fittings meet cell Class 12454 as specified in ASTM D1784. (20 ft.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 General Storage, Handling, and Safety Considerations for Thermoplastic Piping Components STORAGE Thermoplastic piping components are designed and manufactured for use in systems involving the transport of aggressive liquids as well as potable water. In order to ensure their integrity, they must be handled with reasonable care prior to installation. Pipe When pipe is received in standard lifts it should remain in the lift until ready for use.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 General Storage, Handling, and Safety Considerations for Thermoplastic Piping Components (continued) Solvent Cements and Primers DANGER: • Solvent cements and primers are extremely flammable. • Vapors from solvent cements and primers may be harmful if inhaled for prolonged periods of time. • Solvent cements and primers may be harmful if swallowed. • Solvent cements and primers may cause skin or eye irritation.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems Scope The solvent welding procedure detailed herein applies to all NIBCO® ABS-DWV, PVC-DWV, PVC, and CPVC-CTS pressure piping systems including molded fittings and valves. Belledend pipe and sewer pipe can also be joined in this manner. NIBCO TECHNICAL SERVICES is available for additional solvent-welding guidance and recommendations.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems (continued) CLEANING Using a clean, dry cotton rag, wipe away all loose dirt and moisture from the I.D. and O.D. of the pipe/tube end and the I.D. of the fitting. DO NOT ATTEMPT TO SOLVENT-WELD WET SURFACES. DANGER: Solvent cements and primers are extremely flammable and harmful if swallowed. Vapors are harmful.
www.nibco.com www.nibco.com A AH H EE A AD D O O FF TT H H EE FF LL O OW W®® Revised Revised 4/26/2019 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems (continued) Cement Layers must be without voids and sufficient to fill any gap in the joints. HANDLING OF PRIMER AND CEMENT NOTE: Observe the “use prior to” date. Cement has a limited shelf life. Do not permit solvent cement cans to stand open.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems (Continued) ABS, PVC, and CPVC-CTS Joint Movement Times Nominal HOT WEATHER* MILD WEATHER* COLD WEATHER* Size 90°-150°F Surface 50°-90°F Surface 10°-50°F Surface Temperature Temperature Temperature 1/2 - 11/4 12 Min. 20 Min. 30 Min. 11/2 - 21/2 30 Min. 45 Min. 1 Hr. 3-4 45 Min. 1 Hr. 1 Hr. & 30 Min. 6-8 1 Hr. 1 Hr. & 30 Min. 2 Hrs. & 30 Min.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems (Continued) HOT WEATHER CEMENTING Since cement contains a solvent, certain precautions or steps should be taken when the atmospheric temperature is above 90°F, to avoid evaporation of the solvent from the cement just prior to joining.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 Solvent Welding Instructions for ABS, PVC, & CPVC-CTS FlowGuard Gold® Pressure & DWV Piping Systems (Continued) The estimated CPVC-CTS solvent cement requirements listed below should only be considered as a guideline for usage and could vary according to a wide variety of installation conditions. Further, these estimates should in no way be used to restrict the liberal cement application instructions recommended for the tube.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Threading Instructions for Thermoplastic Pipe Scope The procedure presented, herein, covers threading of all IPS Schedule 80 or heavier thermoplastic pipe. These tapered threads are National Pipe Threads (NPT) which are cut to the dimensions outlined in ASME B1.20.1. Thread Dimensions PIPE Nominal Outside Number Size Diameter of Threads Per Inch D, in. 1/4 0.540 18 1/2 0.840 14 3/4 1.050 14 1 1.315 111/2 11/4 1.660 111/2 1 1 /2 1.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 Threading Instructions for Thermoplastic Pipe (Continued) 2. A tapered plug must be inserted in the end of the pipe to be threaded. This plug provides additional support and prevents distortion of the pipe in the threaded area. Distortion of the pipe during the threading operation will result in eccentric threads, non-uniform circumferential thread depth or gouging and tearing of the pipe wall. See table below for approximate plug O.D. dimensions.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 Threading Instructions for Thermoplastic Pipe (Continued) 7. Thread the fitting onto the pipe and tighten by hand. Using a strap wrench only, further tighten the connection an additional one to two threads past hand tightness. Avoid excessive torque as this may cause thread damage or fitting damage. Pressure Testing Threaded piping systems can be pressure tested up to 100% of their hydrostatic pressure rating as soon as the last connection is made.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Flanged Joints Scope Flanging is used extensively for plastic process lines that require periodic dismantling. Plastic flanges and factory flanged valves and fittings in PVC, CPVC, PVDF and polypropylene are available in a full range of sizes and types for joining to pipe by solvent welding, threading, or thermosealing as in the case with polypropylene and PVDF.
AHEAD OF THE F L O W® www.nibco.com Revised 4/26/2019 Flanged Joints (continued) Flange Size 1/2 - 1 1/2 2-4 6-8 10 12 Recommended Torque* 10- 15 ft. lbs. 20- 30 ft. lbs. 33- 50 ft. lbs. 53- 75 ft. lbs. 80-110 ft. lbs. *For a well-lubricated bolt with flat washers under bolt head and nut. The following tightening pattern is suggested for the flange bolts: 5.
AHEAD OF THE F L O W® www.nibco.com Adapting Plastic Piping to Other Piping Materials THREADED CONNECTIONS - ABS, CPVC, & PVC pipe less than Schedule 80 wall should not be threaded. Most codes require transition from one material to another by use of appropriate adapter fittings. NIBCO offers a complete line of adapters for ABS, CPVC, & PVC. Common thread sealants should not be used on threaded ABS, CPVC, or PVC joints. When necessary, PTFE pipe tape can be used.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Pipe Support Spacing ABS & PVC piping should be supported just as any other piping system. Ordinary hanger straps may be used for suspending below floor systems. The light weight of ABS & PVC may lead one to believe that wider hanger spacing could be permitted. Four or five foot spacing is recommended, with proper support at the base of each stack. CPVC Pressure pipe should be supported every three feet.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Expansion and Contraction of Plastic Pipe CALCULATING STRESS Plastics, like other piping materials, undergo dimensional changes as a result of temperature variations above and below the installation temperature. If movement resulting from these dimensional changes is restricted by adjacent equipment or by a vessel to which the pipe may be rigidly attached, the resultant stresses and forces may cause damage to such items or even to the pipe itself.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 Expansion and Contraction of Plastic Pipe (Continued) Where: ∆L = Dimensional change due to thermal expansion or contraction (in.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS-DWV Figure Number Comparison NIBCO FIG. NO.
www.nibco.com www.nibco.com A AH H EE A AD D O O FF TT H H EE FF LL O OW W®® Revised Revised 4/26/2019 4/26/2019 ABS-DWV Figure Number Comparison NIBCO FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 ABS-DWV Figure Number Comparison NIBCO FIG. NO.
www.nibco.com www.nibco.com A AH H EE A AD D O O FF TT H H EE FF LL O OW W®® Revised Revised 4/26/2019 4/26/2019 ABS-DWV Figure Number Comparison NIBCO FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC-DWV Figure Number Comparison NIBCO FIG. NO.
www.nibco.com AA HH EE AA DD O O FF TT HH EE FF LL O OW W®® Revised Revised 4/26/2019 4/26/2019 PVC-DWV Figure Number Comparison NIBCO FIG. NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC-DWV Figure Number Comparison NIBCO FIG. NO. SIZE NO.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 PVC-DWV Figure Number Comparison NIBCO CHARLOTTE FIG. NO. SIZE FIG. NO.
AHEAD OF THE F L O W® www.nibco.com NOTES: 100 NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.
AHEAD OF THE www.nibco.com F L O W® Revised 11/22/2021 NIBCO ® Plastic Fittings Limited Warranty NIBCO INC. LIMITED WARRANTY Applicable to NIBCO Plastic Fittings 5 years NIBCO INC.
AHEAD OF THE www.nibco.com F L O W® Revised 4/26/2019 How to Order State quantity, figure number and size for each valve or fitting you wish to order. See individual catalog pages for specific or special product designations. HOW MANY TO ORDER NIBCO ® valves and fittings are decimal packed for your convenience in handling, shipping and stockkeeping. Number in master carton varies with item. POLICY ON RETURNS TO FACTORY No NIBCO valves and fittings are to be returned without prior written agreement.
globally connecting you at all levels It’s a new age of business, and a new way at NIBCO. From Elkhart, Indiana to Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service, 24 hours a day, 7 days a week. But this integration hasn’t happened overnight. It’s been part of a longterm strategic process that has pushed us to reconsider every aspect World Headquarters of our business.
C-PF-0618 VALVES Pressure-rated bronze, iron and alloy-iron gate, globe and check valves • Pressurerated bronze ball valves • Boiler specialty valves • Commercial and industrial butterfly valves • Lined butterfly valves • Circuit balancing valves and kits • Carbon and stainless steel ball valves • ANSI flanged steel ball valves • Lined ball valves • Pneumatic and electric actuators and controls • Grooved ball and butterfly valves • High performance butterfly valves • UL/FM fire protection valves • MSS spe