Installation Guide

ManualsBrandsNicor Lighting ManualsCeiling LightsDLR4 SELECT Series 4 in. Nickel LED Recessed Downlight

DLR4 Select LED Downlight

INSTALLATION INSTRUCTIONS

Model: DLR4506120S

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com December 26, 2019 5:07 PM

What’s In The Box

One (1) DLR

WARNING

- Risk of re or electric shock. LED Retrot Kit installation requires knowledge of luminaires electrical

systems. If not qualied, do not attempt installation. Contact a qualied electrician.

- Risk of re or electric shock. Install this kit only in the luminaires that have the construction features and

dimensions shown in the photographs and/or drawings where the input rating of the retrot kit does not

exceed the input rating of the luminaire.

- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit

installation.

- This retrot kit is accepted as a component of a luminaire where the suitability of the combination shall be

determined by authorities having jurisdiction.

Tools Needed

The DLR4 LED Downlight is designed to fit into a

4” housing. No tools are necessary for installation

Selectable CCT

The DLR4 Selectable Recessed LED Downlight is

equipped with a selectable switch to choose the

CCT of your choice. Before installation, see the

switch on top of the trim and select from 3000K,

4000K or 5000K.

Carefully route wires

into the housing.

Make sure all power is turned o before beginning installation

If using an LED housing with IDEAL connector, mate the

quick connectors.

Carefully unpack the downlight from its packaging. Inspect product for defects due to shipping.

Installing the DLR

If using optional colored trim, align trim onto downlight and secure by bending over tabs.

Push the downlight upward making sure it is

flush to the ceiling surface.

If using an incadescent housing, screw the edison

base socket string into the socket. Mate the

downlight connector into the Edison (or GU24) base

connector.

One (1) Edison Base Socket

String

4.02”

102 mm

3.5”

89 mm

Minimum Lamp

Compartment Dimensions

Summary of content (2 pages)

PAGE 1
DLR4 Select LED Downlight INSTALLATION INSTRUCTIONS Model: DLR4506120S WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. - Risk of fire or electric shock.
PAGE 2
DLR4 Select LED Downlight INSTALLATION INSTRUCTIONS Model: DLR4506120S EXPRESS LIMITED WARRANTY Subject to the exclusions below, each NICOR LED product, including the LED electronics and components of a property installed NICOR LED product, will be free from defect in materials and workmanship for a period of ve (5) years from the original date of purchase. The product shall be considered defective only if 10% or more of the product’s LED components fail.