Specifications

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393
www.nicorlighting.com March 23, 2020 1:04 PM DLR Select Rev A Page 1 of 3
DLRv5 Select
Recessed LED Downlight
Product Description
Now part of the NICOR Select line, the DLR Select from NICOR is a 4” or 5” & 6” recessed
LED downlight that is ideal for new construction using the patented new construction
frame or as a retrot into most 4” or 5” & 6” housings. Improved to meet the newest
certication standards, the DLR Select is over 60 LPW, 90+ CRI and R9 greater than 50.
With a micro-switch on the driver cap, the DLR Select oers the ability to adjust the CCT to
3000K, 4000K, or 5000K. The DLRv5 system of the downlight combined with the frame
provides the lowest overall system cost for energy ecient, high quality lighting.
Construction
• Spun aluminum trim routes heat away from electrical components
• Aluminum driver cover for additional thermal management
• Fully captured stainless steel V-springs on 6”
• Friction t stainless steel arms on 4”
• IDEAL luminaire connector
• Low prole, integrated driver designed for DLRv5 frame use
Optical System
• Dual emitter array enables CCT selection of 3000K, 4000K, or 5000K
• Binned within 4-step MacAdams with duv <±0.003
• Utilizes high performing LEDs with 90+ CRI and an R9 > 50
• Polystyrene diuser creates uniform distribution without sacricing lumen output
• Increased trim depth provides lower glare and a quieter ceiling
Electrical
• Input voltage of 120VAC
• Utilizes high performing LEDs with >90 CRI and an R9 >50
• Dimmable below 10% with compatible leading edge (TRIAC) or trailing edge (ELV)
dimmers
• Operating temperature rating of 0°F to 120°F (-18°C to 49°C)
Finish
• Exterior white powder coat nish
• Available accessory trim covers in Black, Oil-Rubbed Bronze and Nickel
Mounting and Installation
• Compatible with patented DLRv5 frame
• Compatible with most 4” or 5” & 6” recessed housings
• Quick and easy installation with an IDEAL luminaire connector and torsion spring or
friction t mounting system
• Ships with Edison base socket string (GU24 socket string available)
Listings
• LM-79, LM-80 testing performed in accordance with IESNA standards
• UL/cUL1598 Listed for wet locations
• Airtight when used with DLR56 frame
• RoHS Compliant
• Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions
• LED lumen maintenance: L70(9k)>54,000 hrs
Warranty
• 5-year limited system warranty
• Warranty does not cover product failure due to an overvoltage event (power surge).
For installations where power surge may be possible, NICOR recommends installing
additional surge protection at the electrical distribution panel
* not available
at 5000K
Type
Date
Catalog
Project
Patent Pending
AIRTIGHT
3.0 in
(76mm)
7.4in
(188mm)
2.7in
(68mm)
5.1in
(130mm)