How to Guide

NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com January 10, 2019 5:12 PM

DLR Recessed LED Downlight

INSTALLATION INSTRUCTIONS

Model: DLR56508, DLR56512

What’s In The Box

One (1) DLR

One (1) Edison Base Socket

String

WARNING

- Risk of re or electric shock. LED Retrot Kit installation requires knowledge of luminaires electrical

systems. If not qualied, do not attempt installation. Contact a qualied electrician.

- Risk of re or electric shock. Install this kit only in the luminaires that have the construction features and

dimensions shown in the photographs and/or drawings where the input rating of the retrot kit does not

exceed the input rating of the luminaire.

- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

- This retrot kit is accepted as a component of a luminaire where the suitability of the combination shall be

determined by authorities having jurisdiction.

Tools Needed

The DLR Recessed LED Downlight is designed to t into a

5” or 6” housing with torsion spring receiving brackets. No

tools are necessary for installation.

If using an LED housing with IDEAL connector, mate

the quick connectors.

Carefully route wires into housing and push the

downlight upward making sure it is ush to the

ceiling surface.

If using an incadescent housing, screw the edison

base socket string into the socket. Mate the

downlight connector into the Edison (or GU24) base

connector.

Make sure all power is turned o before beginning installation

Squeeze torsion springs together and install into

torsion spring brackets inside recessed housing.

Carefully unpack the downlight from its packaging. Inspect product for defects due to shipping.

Installing the DLR

If using optional colored trim, align trim onto downlight and secure by bending over tabs.

5.00”

127 mm

5.71”

145 mm

Minimum Lamp

Compartment Dimensions

PAGE 1
DLR Recessed LED Downlight INSTALLATION INSTRUCTIONS Model: DLR56508, DLR56512 WARNING - Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. - Risk of fire or electric shock.
PAGE 2
DLR Recessed LED Downlight INSTALLATION INSTRUCTIONS Model: DLR56508, DLR56512 EXPRESS LIMITED WARRANTY Subject to the exclusions below, each NICOR LED product, including the LED electronics and components of a property installed NICOR LED product, will be free from defect in materials and workmanship for a period of ve (5) years from the original date of purchase. The product shall be considered defective only if 10% or more of the product’s LED components fail.