Installation Guide
Attach the provided chain securely to the included wire
hangers, then insert the wire hangers into the slotted holes,
as shown below, located on top of both sides of the xture.
Attach xture to conduit securely and make wiring
connections (see wiring instructions below).
Place pendant hanger on the xture as shown below.
Align screw holes and bolt the bracket to the xture using the
provided hardware.
Once the connections are made, attach both face plates to the
mounting bracket using the provided hardware.
3a
3b
4b
Chain Kit
Pendant Kit
cap o dimming
wires if not used
Wiring Diagram