How to Guide

Important! Leave the bolts a bit loose.

16mm Bolt 30mm Bolt

Page 2 of 8

The Back Deck slat bundle is longer than the seat.

Identify the correct slat supports as shown below,

and fit under the slats. *Queen size please

note: The Slat supports for the Back

Deck are longer than on the Seat.

Fit the Slat Supports to the Back Deck.

CON TINENTAL

FRAME

Assembly Instructions

Full Size • Queen Size

Slat support*

without Holes.

Slat support*

with Holes.

Back Deck Rails

and Slats (longer)

Slat support*

with Holes.

Holes.

Use the 16mm Bolts and the

30mm Bolts to attach the

Slat supports, but

do not fully tighten them yet!

ALBANY ARM

BIFOLD FUTON FRAME

Clevis

pins

Washers

Locking

pins

Back Side Rail

Rollers

Fit the B3 Rollers to the

Back Side Rails

30mm Bolts

16mm Bolt

16mm Bolts

0309