How to Guide

Page 6 of 8
Attach Arms to Stretchers.
6C
Using Bolts and Barrel Nuts attach the
Arms loosely to the Stretchers as shown.
It is important that these Bolts
are left LOOSE!
Be sure the holes are
free of wood chips
and saw dust.
Do not force the Bolt
as you may strip the
thread. Be sure the
thread is properly started.
Barrel Nut
Bolt
Allen Key
Screwdriver
BOLT AND BARREL NUT
ASSEMBLY SYSTEM
Insert Barrel Nuts as shown
using a screwdriver. This will
help you position the Nut in
line with the Bolt.
Bolt
TM
CON TINENTAL
FRAME
Assembly Instructions
Full Size • Queen Size
Rear
stretcher
(
no
plates
)
The
Front
Stretcher
has
metal
plates
which
should
face
upwards.
THIS END
FRONT
Do not tighten
the Bolts at
this stage!
Wooden
Dowel
Barrel
Nuts
Barrel
Nuts
60mm
Bolts
100mm Bolts
100mm Bolts
Fit Wooden Dowels to the Stretchers.
6A
Fasten Stretcher Brackets to the
Arms:
A.
Insert the Stretcher Bracket Cleat into the hole
provided.
B.
IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Cleat
Stretcher
Bracket
Hole
for Cleat
Leg
Dowel
Hole
16mm Bolt
Allen Key
Hole
for Bolt
C.
Each arm requires two brackets, front and
back.
Tap dowels all the way into the middle
hole at each end of the Stretchers.
Wooden
Dowel
Stretcher
Middle hole
6B
BIFOLD FUTON FRAME
TRINITY ARM
0309