Full Product Manual
4
BTD2 / BTD8 Series Recorder Descriptions
BTD2 / BTD8 Series Recorder
1. Video In (Wired BNC Cameras): Connect your cameras to one of the “Wired Cameras”
Video Input Ports using the provided video power cable. The number of ports will vary
based on your model number.
NOTE: The recorder automatically detects the camera. Before turning the
recorder on, make sure the cameras are connected to the recorder and a
power source.
2. HDMI: While not required, you may connect the recorder to a TV or monitor using the
3. USB Ports: Connect a USB mouse to a USB port to navigate the recorder’s settings
video backup.
NOTE:
4. LAN (Strongly Recommended): Connect your recorder to the Internet using an
Ethernet cable. Again, while not required, this is strongly encouraged to get the full use
network access point or router.
5. Power Input: Connect the recorder power adapter to this port to power the recorder.
NOTE:
location to ensure that all components function properly.
6. Bluetooth
®
Indicator Light: Once the recorder is powered on, this light should turn
blue to indicate that the recorder’s Bluetooth
®
when no device is linked and turn solid blue when a device is paired to the recorder.
1 2 3 4 5 6