Full Product Manual
BTD8 Series Recorder Model # DVR-BTD-8-4POE-2 (ONLY)
7. Video In (Wired IP Cameras): In addition to 8 wired BNC cameras, this model can hold
here using the provided Ethernet cabling.
8. Power Switch: This model has a power switch. Once you have connected the power
supply, ensure you turn the power switch to the ON position.
17
8
2 345 6
BTWN8 Series Recorder Description
1. HDMI: While not required, you may connect the recorder to a TV or monitor using the
2. LAN (Strongly Recommended): Connect your recorder to the Internet using an
Ethernet cable. Again, while not required, this is strongly encouraged to get the full use
network access point.
3. USB Ports: Connect a USB mouse to a USB port to navigate the recorder’s settings
video backup.
NOTE:
4. Power Input: Connect the recorder power adapter to this port to power the recorder.
NOTE:
location to ensure that all components function properly.
5. Wi-Fi Antenna Mounts: Connect the two Wi-Fi NVR antennas to these ports. This is
how the Wi-Fi NVR wirelessly communicates with your cameras.
6. Bluetooth
®
Indicator Light: Once the recorder is powered on, this light should turn
blue to indicate that the recorder’s Bluetooth
®
when no device is linked and turn solid blue when a device is paired to the recorder.
5
*Steps 1 through 6 on previous page
16
5 5
2 3 4