Full Product Manual
8
your new system, it is time to get the hardware connected. If you have a BTD2 or
BTD8 Series DVR, please proceed to If you
have a BTWN8 Series Wi-Fi NVR, please proceed to
Step 3.
A) BTD2 / BTD8 Series Wired Recorder
1. Visit Support.NightOwlSP.com
A.
Plug the other end of the cable into your
TV or Monitor.
B. Plug the USB mouse into the USB port on
the back of the DVR.
3. Click
2.
recorder) into the search bar
IMPORTANT: If you will be using a TV or monitor for setup or viewing your cameras
TIP:
NOTE:
is plugged into.
Click Here