Full Product Manual

Mounting Surface: Ensure your mounting surface holds at least four times the

camera’s total weight.

Camera Angles: Use the Live View on your recorder or on the app via your

mobile device to verify that your camera will be at an ideal angle before

permanently installing.

Install the Cameras

While your cameras may vary in appearance, these steps will cover installation

basics.

1. Use the holes in the base of each camera as

a template to mark the screw positions on

the surface where you plan to mount the

camera.

2. Using a drill bit slightly smaller than the

included screw anchors, drill into the

mounting surface using the guide marks.

3. Insert the screw anchors. Line up the camera

base holes with the screw anchors, insert

the screws through the base and tighten to

secure the camera in place. Ensure you feed

the camera wire through the indent in the

base as indicated by the green star in the

following illustration.