Full Product Manual
64
Internet)
IMPORTANT: If you did not connect your recorder to the Internet during the
initial setup and instead chose to create a local password or if your
1. With your recorder connected to a TV or monitor, access the Login screen and click
and follow the on-screen instructions.
2. Go to www.no-protect.com.
3. If you already created a Night Owl Protect account, simply log in. If not, create an
account.
4.
If the device has not been registered, click and follow the
prompts.
5. Once the device has been added to your My Devices page, click on
followed by
6. “Get
7.
your TV or monitor and enter this code to gain entry.
NOTE: The 1st 6 digits of the UID and the date can be found on the Reset
Password screen on your TV or monitor.
NOTE: If the UID and date you entered into the web portal were not correct, the
temporary access code will not work and you will need to remove the
device and re-register it.