Installation Guide

2
HDMI
USB
Plug included HDMI cable into
the HDMI port on the back of
the DVR.
1
Plug the USB mouse into the USB
port on the back of the DVR.
3
Plug the included Ethernet
cable into the LAN port on
the back of the DVR.
4
Plug the other end of the
HDMI cable into the back
of the TV or Monitor.
2
Plug the other end of the
Ethernet cable into a numbered
port on the back of the router.
5
STOP: BEFORE installing, test
each camera locally to confirm they
function properly.
Connecting Your System
ETHERNET
NOTE: Monitor is required for initial setup. To
view cameras, TV/Monitor must be tuned to
the same Input the HDMI is plugged into.
(Router Not
Included)
DISCLAIMER: Camera/cable quantities may vary.
ETHERNET