Installation Guide

8
A device can be added to the Night Owl Connect App by using the
application’s Smart Auto Detection or through a QR Code Setup. With Smart
Auto Detection, your DVR will automatically be detected by the Night Owl
Connect software, making connecting easy! To use this preferred method, ensure
your Smart Device and DVR are both on the same network.
Connecting and Adding your Device
If your DVR and Smart Device are running
Night Owl Connect on the same network,
the Smart Auto Detection will find your
DVR. If this method is not available, please
use the QR Code Setup from step 4B below.
4A
Smart Auto Detection
4B
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top of your DVR.
QR Code Setup
Ethernet Cable
WIFI
To begin adding a new device, first select
the yellow plus sign within the Device menu.
Then select your device type from the Device
list and follow the on screen instructions.
Adding a Device
4
NOTE: When adding a new device, it may take 5–10 minutes before you begin
receiving notifications.