Full Product Manual

25
8.3 Scenario
Adjust the Recording Mode, Push Notifications, Light Triggered, Recording Area, and Recording
Sensitivity Settings.
The pre-defined scenarios are created for you to quickly enable the recording and notification
functions which are used frequently. Click
to select or change recording modes.
8.3.1 Pre-defined Scenarios
TIME LAPSE - Default setting for all channels. The DVR records 24/7 at 1 FPS (Frame Per Second).
If an event is detected, the DVR records at full FPS. If a Human or Motion Event is detected, the DVR
records at the set FPS during the duration of the Event. The DVR returns to Time Lapse recording after
the event. Time Lapse can be setup in combination with Motion, Human or both.
FACE DETECTION - Captures a person’s face up to 10 feet away from the camera.
HUMAN DETECTION - Default setting for all channels. The DVR will record at full frame rate when a
human is detected.
MOTION DETECTION - The DVR will record at full frame rate when motion (pixel change) is detected.
CONTINUOUS RECORDING - The DVR records 24/7 at maximum recording speed as set by the user.
PUSH - Disabled by default. When enabled, the DVR sends Push Notifications to your mobile device
when triggered by an event.
Note: To receive Push Notification, the DVR MUST be connected to the Internet and added to your
Night Owl Protect account.
LIGHT - Enabled by default on all channels. If the box is checked, the Light is enabled and turns on
when a HUMAN EVENT is detected.
RECORDING AREA
Set the Recording Area
Area without the red grid – Area the DVR records
Area with the red grid – Area the DVR will NOT record
1
2
3
4
5
6
7
8
64 5 7 8 921 3