User Manual

Explorer-XPL - User manual
Supplied with Lithium battery,
Charging station with xings, red cone
and an AC mains charger with 4 country plug adaptors.
Product weight (g) 280g
Product size (mm) 120x190X70mm
NS Part No. NSEXPLORERXPL
Mounting the charging station to wall
• Push the button, and push the wall plate
down to slide it off the charging station.
• Fix the wall plate to the wall using fixings provided
• Slide the wall station onto the wall plate.
• Charging the Flashlight
• Insert battery in flashlight
• Plug the charger into charging station and
connect to a AC power supply
• Press the ON button on the wall station
• Place the flashlight into wall station
making sure the two pin connectors lineup
between flashlight and charging station.
The red LED will light up when good
connection is made.
• When the battery is fully charged,
the LED on the charger will turn green.
Power/light
mode tail
cap switch
Press
High
1hr
Press and hold
Low
10hrs
Off
Off Press and hold
Flashing
2hrs
Off
Press and hold
SOS
4hrs
Off
EMERGENCY LEDS ON THE CHARGING STATION
All NightSearcher products have a 3-year standard warranty
on all manufacturing defects and 1-year warranty on all
rechargeable batteries from the date of purchase.
For extended 5 year warranty please visit
https://nightsearcher.co.uk/en/extended-warranty.html
proof of purchase is required
NightSearcher Limited
Unit 4 Applied House, Fitzherbert Spur, Farlington,
Portsmouth, Hampshire, PO6 1TT, UK
T: [phone]
E: [e-mail]
• If there is a power cut when the ashlight is mounted in the charging station
the 6 white leds will turn on so the ashlight can be easily found in the dark.
The switch on the charging station must be turned ‘ON’ for the function to work.
User can choose to switch this function ‘ON’ or ‘OFF’.
For use in vehicles:
Optional 12/24V Vehicle Charger
Product code: CHIC3_7-LI-ION