Operation Manual

2
ATTIX 40-0M PC TYPE 22
1)
OEL values = Occupational Exposure Limit
*) Optional accessories / Option depending on model
Original instruction
GB
I
T
C
S
FI
B
G
K
O
SL
DE
NO
P
L
L
V
FR
SV
H
LT
E
L
ES
HR
NL
DA
RO
Z
H
T
R
PT
SK
R
ET
1 Important safety instructions
Symbols used to mark
instructions
Prior to using the appliance for the first time, be sure to read
this document through and keep it ready to hand.
DANGER
Danger that leads directly to serious or irreversible injuries,
or even death.
WARNING
Danger that can lead to serious injuries or even death.
CAUTION
Danger that can lead to minor injuries and damage.
The appliance must
• only be used by persons, who have been instructed in its correct
usage and explicitly commissioned with the task of operating it
only be operated under supervision
not be used by children
not be used by mentally or physically disabled persons
Before starting work, the operating staff must be informed on and
trained within:
use of the vacuum cleaner
risks associated with the material to be picked up
safe disposal of the picked up material
1. Do not use any unsafe work techniques.
2. Never use the vacuum cleaner without a filter.
3. Switch off the appliance and disconnect the mains plug in the
following situations:
- Prior to cleaning and servicing
- Prior to replacing components
- Prior to changing over the appliance
- If foam develops or liquid emerges
Besides the operating instructions and the binding accident preven-
tion regulations valid in the country of use, observe recognised regu-
lations for safety and proper use.
Purpose and intended use
Since 1997, there is a new division of hazardous dusts and their as-
signed vacuum machines. These are regulatedby IEC 60335-2-69
(world wide) and by EN 60335-2-69 (European wide).
Dust Class M (medium). The dusts which belong
to this class are: dusts with OEL values
1)
> 0.1 mg/m³ as well as saw dust. The machine is
tested in its entirety by vacuums for this dust class. The maximum
degree of permeability is 0.1% and the disposal must be low dust.
Machines to be used in Zone 22 are marked as Type 22 vacu-
ums.
These machines may be used for picking up dust from dust class
L, M or H.