Operation Manual

Basic Operations
Basic Operations
10
Basic Operations
11
Nintendo 2DS Components
Nintendo 2DS Components
Nintendo 2DS Components
Notication LED
Indicates the status of the system.
Blue– You have received SpotPass data; blinks for about ve seconds (see page 37).
Green– You have received StreetPass data; blinks for about ve seconds (see page 37).
Orange– A friend has come online; blinks for about ve seconds (see page 32).
Red– Battery power is low; blinks continuously when very low (see page 17).
Microphone
Used by games and
applications that include
microphone features.
Sleep switch
Push to the right to put the system
into Sleep Mode (see page 14).
Power LED
Lights when the power is turned on (see page 17).
Power Button ( )
See page 14.
Upper screen Touch Screen (Lower screen)
Touch-sensitive screen. This screen should only be oper-
ated with a Nintendo licensed stylus.
Using the Touch Screen
Control buttons
Inner camera
Used by games or other applications that
include camera features.
NOTE: Avoid getting the camera lens
dirty. If it becomes dirty, wipe gently
with a soft cloth, being careful not to
damage the lens.
Speaker
SELECT
START
Circle Pad
For game-play control that
supports this feature. See the
instructions for the game you
are playing for specic control
information.
Volume control
Slide to adjust the volume.
NOTE: The camera shutter sound always plays
at a xed volume and is not aected by the
volume control.
HOME
Displays the HOME Menu during a game.
+
Control Pad
Recharge LED ( )
Lights when the battery is being charged (see page 13).
Audio jack
For connection of stereo headphones (sold
separately). If headphones are connected,
no sound will play through the speaker. (This
system is not compatible with the Nintendo
DS Headset.)
When using headphones, set
the volume at a safe level. Setting the volume
too high may harm your hearing or damage the
headphones.
The lower LCD screen, or Touch Screen, is touch-
sensitive. For games that include this game control
feature, operate the screen by using the included stylus.
Lightly touch or slide the stylus across the Touch Screen
as shown.
SD Card slot
For inserting an SD or SDHC Card
(see page 18).
Wireless LED ( )
Lights when wireless com-
munication is turned on, turns
o when communication is
turned o, and blinks while
data is being sent or received
or when the system is in Sleep
Mode (dimly).
NOTE: Wireless communica-
tion can be turned on or o
from the HOME Menu (see
page 25).
Volume
+
–