Operation Manual

BSW SYSTEM LIMITATIONS
WARNING
Listed below are the system limitations for
the BSW system. Failure to operate the
vehicle in accordance with these system
limitations could result in serious injury or
death.
The BSW system cannot detect all ve-
hicles under all conditions.
The radar sensors may not be able to
detect and activate BSW when certain
objects are present such as:
Pedestrian, bicycles, animals.
Vehicles such as motorcycles, low
height vehicles, or high ground clear-
ance vehicles.
Oncoming vehicles.
Vehicles remaining in the detection
zone when you accelerate from a
stop.
A vehicle merging into an adjacent
lane at a speed approximately the
same as your vehicle.
A vehicle approaching rapidly from
behind.
A vehicle which your vehicle over-
takes rapidly.
A vehicle that passes through the de-
tection zone quickly.
When overtaking several vehicles in
a row, the vehicles after the first ve-
hicle may not be detected if they are
traveling close together.
The radar sensors’ detection zone is
designed based on a standard lane
width. When driving in a wider lane,
the radar sensors may not detect ve-
hicles in an adjacent lane. When driv-
ing in a narrow lane, the radar sen-
sors may detect vehicles driving two
lanes away.
The radar sensors are designed to
ignore most stationary objects, how-
ever objects such as guardrails,
walls, foliage and parked vehicles
may occasionally be detected. This is
a normal operation condition.
The following conditions may reduce
the ability of the radar to detect other
vehicles:
Severe weather
Road spray
Ice/frost/snow build-up on the
vehicle
Dirt build-up on the vehicle
Do not attach stickers (including trans-
parent material), install accessories or
apply additional paint near the radar
sensors. These conditions may reduce
the ability of the radar to detect other
vehicles.
Excessive noise (for example, audio
system volume, open vehicle window)
will interfere with the chime sound, and
it may not be heard.
5-26 Starting and driving