SDS

Material Safety Data Sheet
Report No.:STRT18019256S Page 6 of 10
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Conditions for safe storage, including any incompatibilities
If the Li-ion Battery is subject to storage for such a long term as more than 3 months, it is
recommended to recharge the Li-ion Battery periodically.
3 months: -10~+40, 45 to 85%RH
And recommended at 0~+35 for long period storage.
The capacity recovery rate in the delivery state (50% capacity of fully charged) after storage is
assumed to be 80% or more.
The voltage for a long time storage shall be 3.0V~4.2V range.
Do not storage Li-ion Battery haphazardly in a box or drawer where they may short-circuit each other
or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Li-ion Battery to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away- Do not smoke.
Store in cool, dry and well-ventilated place.
Incompatible Products
None known.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Control parameters
Ingredients with limit values that require monitoring at the workplace:
12190-79-3 Lithium Cobalt Oxide
TLV (USA) 0.02mg/m
3
MAK (Germany) 0.1mg/m
3
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in
AFL-CIO v. OSHA, 965 F.2d 962(11th Cir., 1992).
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations
Ventilation systems
Use adequate general or local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Ensure adequate ventilation.
Individual protection measures, such as personal protective equipment
Eye/Face Protection:
Tightly sealed goggles
Body protection:
Protective work clothing.
Skin protection:
Protective gloves