User Manual

ManualsBrandsNitek ManualsHardwareET1500C

NITEK ®

De Schans 19-21 2a

8231 KA Lelystad

Tel: +31(0)320-230005

E-mail: info@nitek.nl

WWW.NITEK.NL

USA

5410 Newport Drive, # 24

Rolling Meadows, IL 60008

Phone: (847) 259-8900

Fax: (847) 259-1300

E-mail: info@nitek.net

WWW.NITEK.NET

EUROPE

The ET1500C is another component of the NITEK EtherStretch line. This Environmentally

Hardened EtherStretch solution allows for the utilization of existing cable infrastructure (coax or

UTP) to transmit data from IP cameras and other network devices along with power (PoE) to

operate these networked devices well beyond standard network limitations. The system can ex-

tend Ethernet to over 500m or 1600ft of coaxial cable making the ET1500C is ideal for retrofitting

existing installations.

The ET1500C is a transmitter that mates with any of the EtherStretch Multi-port series receiver

units and require very little installation time and no set up or configuration. This system quickly

turns any ordinary RG59 coax cable into a high speed network communication and PoE path-

way. The ET1500C is completely transparent to the network thus requiring no IP and MAC ad-

dressing. Simply connect your network devices to the networking ports of the ET1500C transmit-

ter and associated receiver along with existing cabling and the system begins communicating.

LED indicators show the status and speed of network communications and PoE power.

The NITEK EtherStretch ET1500C reliably extends network communications to overcome cable

distance limitations offering connectivity to devices in locations traditional networking does not

allow. The units are constructed of industrial grade RoHS compliant plated aluminum with a cor-

rosion resistant finish makes them extremely durable.

INSTALLATION GUIDE

ET1500C

IP Video Camera Over Coax

Ethernet Extender & PoE Injector with EtherStretch

Description

IEC/UL 60950-1

10292013

Patent Pending

Summary of content (8 pages)

PAGE 1
INSTALLATION GUIDE ET1500C IP Video Camera Over Coax Ethernet Extender & PoE Injector with EtherStretch Description The ET1500C is another component of the NITEK EtherStretch line. This Environmentally Hardened EtherStretch solution allows for the utilization of existing cable infrastructure (coax or UTP) to transmit data from IP cameras and other network devices along with power (PoE) to operate these networked devices well beyond standard network limitations.
PAGE 2
Important Safety Instructions Read all Safety Instructions. Keep the Instructions for future reference. Be sure to HEED all Warnings. Follow ALL instructions. DO NOT use this device or any of the equipment described, near water. Clean this device ONLY with a dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
PAGE 3
Parts of the ET1500C Installation Considerations Wire and Cable Recommendations: The EL1500C is designed for use with RG59U 75 Ohm copper based 18AWG (American Wire Gauge) coaxial cable. The quality of which must be consistent with any reasonably serviceable cable condition. That is free from damage as in cuts, breaks, or cracks to the outer covering and insulated shielding which may compromise the signal conductivity of the cable.
PAGE 4
Installation & Setup Equipment Requirements & Mounting: The process for utilizing the ET1500C is rather quick and easy. A common topology involves a length of existing coax cable up to 1,600 feet or 500 meters, the ET1500C transmitter and the associated rack mounted multi-port receiver such as the ER8500C or ER16500C, an IP camera or other peripheral network device. The IP camera must be either 802.3af or 802.3at compliant. That is requiring no more then 15.4 W 48VDC @ 350mA of 802.3af (PoE) or up to 25.
PAGE 5
Device Dimensions 3.9" 1.1" Optional Power Input, Class 2 48 to 56VDC, 800mA NITEK Link Status EL1500C 1.6" Coax Port 10/100 POE OUT Network Port Power Made in USA Right TOP Left Bottom 1.6" 1.1" 568B Pin out Termination 5.1" See Installation Manual for Hookup instructions WWW.NITEK.
PAGE 6
Connectivity Status LED INDICATORS Connector Network Port Link Port LED OFF ON FLASHING Power No power Power Good Link Status No Ethernet Link Ethernet Link Good PoE Out No PoE Power Out PoE Power Good 10/100 No Link 100Mb 10Mb PoE Distance Chart Available PoE Wattage At PoE Device 25.0 21.7 21.7 Watts 20.0 18.2 15.0 14.4 12. 10.0 5.0 100 Meters 328 Feet 21.7 Watts 200 Meters 650 Feet 21.7 Watts 300 Meters 1,000 Feet 18.2 Watts 400 Meters 1,300 Feet 14.
PAGE 7
Troubleshooting PROBLEM POSSIBLE CAUSE No video/data Check camera and ET1500C device connections. Check coax cable condition and BNC connectors. Check that the camera is powered. Check that supplied camera power meets manufacturer’s specifications. Check cable that cable distances do not exceed PoE capabilities. Refer to chart on pg 5. Check that coax cable does not exceed the Ethernet data transmission operating distances of the ET1500C. Check link & device status. See chart on pg 5.
PAGE 8
Product Warranty and Return Information Limited Warranty Network Extender Products NITEK warrants the original consumer purchaser that the Network Extender products that it sells will be free from defects in material and workmanship for a period of two years from date of purchase.