Instructions / Assembly

Step 4
Stand the Table up, with assistance from your partner.
EXPERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Top reach alignment at all joints.
Check for wobbles on a level surface. If no
wobbles are found, in a sequential manner, gradually tighten all Bolts until
evenly secured.
CAUTION 1: When tightening the Bolts, tighten sequentially.
DO NOT tighten any bolt fully and then towards the next one.
This would cause the frame to warp.
If there is still wobbles, loosen the Bolts and execute this same
process.
WARNING!! IF DINING TABLE IS NOT STABLE , IT COULD LEAD TO
DAMAGING THE PRODUCT.
Ensure all bolts are fully locked into position.
The Dining Table is ready to be used.
Caution 2: This Dining Table can only be used on a flat, level surface.
Page 5 OF 6