Instructions / Assembly

ManualsBrandsNoble House ManualsEntryway FurnitureMerlack Walnut Natural and Antique Gold Wicker Accent Console Table

WARNING!!

Children have died from furniture tipovers. Tip restraints have been

included with this product; you must install the tip restraints according

to these instructions in order to minimize the risk of furniture tipping. If

you have any questions about this product or the tip restraint, please

send us an email at tip_restraint_help@Noblehousefurniture.com

NEVER allow children to climb or hang on furniture, including drawers

or cabinet doors.

In addition to installing the restrains，to help prevent tip-overs

1. NEVER put a TV or other heavy objects on top of this product".

2. Do not stand on the products.

Noble house Home Furnishings LLC Page 1 OF Page 8

Summary of content (8 pages)

PAGE 1
WARNING!! Children have died from furniture tipovers. Tip restraints have been included with this product; you must install the tip restraints according to these instructions in order to minimize the risk of furniture tipping. If you have any questions about this product or the tip restraint, please send us an email at tip_restraint_help@Noblehousefurniture.com NEVER allow children to climb or hang on furniture, including drawers or cabinet doors.
PAGE 2
Caution : You must read this before you proceed Table Label Picture Description QTY A Table Top 1 B Leg 1 Noble house Home Furnishings LLC Page 2 OF Page 8
PAGE 3
Label Picture Description QTY ① Adjustable Leveller （M6*15*23mm) 5 ② Bolt(M6*20MM) 5 ③ Flat Washer 5 ④ Allen Key(M6) 1 ⑤ Screw（M4*40mm) 2 ⑥ Screw（M4*16mm) 2 ⑦ Wall Anchor 2 ⑧ Restraint Strap 2 ⑨ Power Drill (not provided) 1 ⑩ Hammer (not provided) 1 Restraint Device Hardware Noble house Home Furnishings LLC Page 3 OF Page 8
PAGE 4
Before Beginning Assembly: Overview Table Top (A) Leg(B) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
PAGE 5
Step 1 Attach Legs(B) to Table Top(A) using Bolts(②) and Flat Washers(③)with the Allen Key(④) . Step 2 Attach the Adjustable Levellers(①) to the Legs(B) by hand. Step 3 Turn the Table right side up. Your Table is ready for use. Caution:This Table can only be used on a flat, level surface.
PAGE 6
Tipover Restraint Device Installation Instruction WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using the Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Table Restraint Device: To secure the Table against wall, attach one end of the Restraint Straps(⑧) to the wall and the other end of the Restraint Straps(⑧) to the product.
PAGE 7
Step 2 2.2 2.1 2.1)Drill two holes on the wall at the same height as the Restraint Straps(⑧) on the Table using a Power Drill(⑨). You can mark this point in two ways as below: 1) Move theTable back to the wall. Mark two points the same height as the Table on the wall. Note: The Restraint Straps need to be secured to a solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
PAGE 8
Care & Maintenance ● Furniture may scratch floors. We recommend using furniture pads to protect your floors. ● Do not put hot items directly on furniture surface. ● Do not clean furniture with harsh cleansers or polish. ● Do not place furniture under direct sunlight. ● Do not place furniture near heating or cooling vents. ● Do not write on furniture without a padded barrier to protect the surface. ● Do not place furniture outside . For indoor use only. ● Not for commercial use.