Instructions / Assembly

Position the Ottoman on it's side.
Install the Wooden Legs(C) into the bottom of the Ottoman Body(A) by
placing a Gasket(④) onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position
at each Corner of the Bottom of the Ottoman Body(A).
Tighten by turning the Legs clockwise.
Position Ottoman right side up and test for stability on a Level Surface.
Note: The use of Gaskets are OPTIONAL and are especially useful
to help alleviate slight wobbles. Some Wooden Legs may need
more than one whilst some legs do not need any.
Your Ottoman it is ready for use.
This Ottoman can only be used on a flat, level surface.
Step 2
Step 3
B
A
C
Use of Gasket is to
alleviate wobbles
and achieve
stability
5 OF 6