Assembly Instructions Caution : You must read this before you proceed Dining Chair CAUTION : This chair is NOT a TOY. Keep your child / children at bay in the process of assembly.
C Left Arm Leg with Preattached Levellers 1 D Right Arm Leg with Pre-attached Levellers 1 E Seat Cushion 1 Description QTY ① Bolts(M8*22mm) 5 ② Washers(8mm) 5 ③ Spring Washers(8mm) 5 ④ Bolts(M6*22mm) 5 ⑤ Washers(6mm) 5 ⑥ Spring Washers(6mm) 5 ⑦ Allen Key(8mm) 1 ⑧ Allen Key(6mm) 1 Label Picture Noble house Home Furnishings LLC Page 2 OF 6
Before Beginning Assembly: Overview Left Arm Leg with Pre-attached Backrest Panel(A) Seat Panal(B) Right Arm Leg with Pre-attached Seat Cushion(E) FRONT FACING This chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean soft surface. Step 2 A C Turn the Left Arm Leg with Pre-attached Levellers(C) upside down on to a soft surface. Attach Backrest Panel (A) to the Left Arm Leg with Pre-attached Levellers(C) using bolts(④), spring washers(⑥) and washers(⑤) with allen key(⑧). Do not fully tighten at this stage. Step 3 B ⑦ A C Then attach Chair Seat Panel(B) to Left Arm Leg with Pre-attached Levellers(C) using bolts(①), spring washers(③) and washers(②) with allen key(⑦).
Step 4 ⑦ Repeat the same assembly process for the Right Arm Leg with Preattached Levellers(D). DO NOT fully tighten at this stage. Step 5 Stand the chair rightside up. Place the Seat Cushion(E) on the Chair. Adjust the Pre-attached levellers at the bottoms of the chair legs until the chair is level with the ground. Your chair is ready for using. Caution: This Chair can only be used on a flat, level surface.
Noble house Home Furnishings LLC Page 6 OF 6