Caution: You must read this before you process TABLE CAUTION : This Table is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Table and to prevent damage to the Table, two adults are needed to execute this action.
Label Picture Description QTY A Table Top 1 B First Leg Frame (with Leveler) 1 C Second Leg Frame (with Leveler) 1 D Lower Cross Block 1 E Upper Cross Block 1 Description QTY ① Short Bolts (M8x55mm) 5 ② Sleeve Nut (M8x20mm) 5 ③ Long Bolts (M6x90mm) 2 ④ Screw (M7x45mm) 9 ⑤ Allen key 2 6 Iron washer 5 Label Picture
Before Beginning Assembly: Table Top (A) Upper Cross Block (E) Second Leg Frame (C) First Leg Frame (C) Lower Cross Block (D) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 c c B B With the assistance of your partner, position the First Leg Frame(B) to the Second Leg Frame © as picture above. Secure First Leg Frame(B) with the Second Leg Frame (C) by using Long Bolt (③) and Allen Key (⑤). Note: This step, legs with leveler will be upside down. Do not fully tighten the Bolts.
Step 3 D With the assistance of your partner, position the Lower Cross Block (D) onto the Leg Frames in Step 2. Secure by using Screws (④) and the Allen Key (⑤). Do not fully tighten the Screws. Step 4 E With the assistance of your partner, turn Leg Frame in step 3 180 degree. Position the Upper Cross Block (E) onto the Leg Frame as picture above. Secure by using Screws (④) and the Allen Key (⑤). Do not fully tighten the Screws.
Step 5 STEP 5.1 STEP 5.2 Place Table top (A) with its underside skywards onto a clean, soft surface to avoid any scratch or damage to the product. Position Leg Frame in step 4 onto Table Top (A) 5.1) Using two Short Bolts (①), two Sleeve Nuts (②), two Iron Washer (⑥) and Allen Key (⑤) to connect middle support bar of Table Top (A) and Leg Frame (B & C). 5.
Questions & Answers about Proposition 65 · What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause , birth defects or other . These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals.
