Installation Guide

ManualsBrandsNoble House ManualsFire Pit Patio SetsCape Coral Grey 5-Piece Metal Patio Fire Pit Set with Dark Grey Cushions

Label Picture Description QTY

A Left Side Panel 1

B Right Side Panel 1

C Back Support Bar 1

Seat (Labelled with face

and bottom)

E Seat Cushion 2

F Back Cushion 2

Label Picture Description QTY

①

Bolt (M6*20MM) 5

②

Bolt (M6*25MM) 7

③

Allen Key 1

Caution : You must read this before you proceed

Loveseat

Noble house Home Furnishings LLC Page 1 OF 5

Summary of content (5 pages)

PAGE 1
Caution : You must read this before you proceed Loveseat Label Picture Description QTY A Left Side Panel 1 B Right Side Panel 1 C Back Support Bar 1 D Seat (Labelled with face and bottom) 1 E Seat Cushion 2 F Back Cushion 2 Label Picture Description QTY ① Bolt (M6*20MM) 5 ② Bolt (M6*25MM) 7 ③ Allen Key 1 Noble house Home Furnishings LLC Page 1 OF 5
PAGE 2
Before Beginning Assembly: Step 1 As shown above, use an inner hexagon wrench (3) to remove the plastic plug (to prevent aluminum deformation) from the four ends of the seat (D). If necessary, please keep the plastic plug for repacking. Step 2 D A Open the carton and place all the parts on a clean,non-marring surface. Insert the Seat(D) into the Left Side Panel(A),shown as the picture.
PAGE 3
Step 3 D Step 3.1 Step 3.2 A 3.1)Attach Seat(D) and Left Side Panel(A) using Bolt(②) with Allen Key(③) as shown in the picture. 3.2)Attach Seat(D) and Left Side Panel(A) using Bolt(①) with Allen Key(③) as shown in the picture. Do not fully tighten the Bolt. Step 4 D C A Connect the rear support rod (C) to the left panel (A) using an inner hexagon wrench (3) and bolts (2) as shown. Do not tighten the bolt completely. Step 5 A C D Step 5.1 Step 5.2 B 5.
PAGE 4
Step 6 A C D B As shown, bolt (2) and connect the rear support rod (C) to the right panel (B) with an inner hexagon wrench (3). Loosen bolt not completely. Step 7 Set up the love sofa. Place the love sofa on a level. Check and ensure that all parts are fully connected. Sit gently and carefully on the sofa. This will help align all the parts at all the joints. Then carefully leave the sofa and tighten all the bolts in sequence. When tightening bolts, tighten them in sequence.
PAGE 5
Step 8 F E Put the seat cushion (E) and cushion (F) on the love sofa. Then stick the Velcro from the back pad to the seat cushion. Your sofa is ready.