Use and Care Manual

Step 10

Insert the Roof Panel(M) and Roof Panel(N) into the Roof Bar's bottom tracks as pictured

above.

Note: Ensure they are completely inserted in the tracks.

Insert the Roof Finishing Bar(G) and Roof Finishing Bar(F) into the Roof Bar's bottom

tracks as pictured above.

Attach Finishing End(X), Roof Finishing Bar(G) and Roof Finishing Bar(F) to Roof Bar(E)

using Bolt(④) and Washer(⑨) with Allen Key(⑦).

Attach Corner Finishing End(Y) to Long Corner Roof Bar(D) using Bolt(④) and Washer(⑨)

with Allen Key(⑦).

Repeat the process from Step 9 and Step 10 three times.

Tighten all Bolts fully in a sequential manner.

Note: Please remove the white protective film from the Panels before assembly. The

white protective film side is the face.

④+⑨

Noble House Home Furnishings LLC Page 13 OF 15