Instructions / Assembly

Label Picture Descri

tion QTY

Right Leg Panel (labeled A1)

Left Leg Panel (labeled A2)

Backrest Panels

Seat Panels

Label Picture Description QTY

①

Short Screws (M6*40mm)

②

Long Screws (M6*60mm)

③

JRN Nut

④

Allen Key

⑤

Screw Bit

Caution : You must read this before you proceed

ARMCHAIR

PAGE 1
Caution : You must read this before you proceed ARMCHAIR Label Picture Description QTY A1 Right Leg Panel (labeled A1) 1 A2 Left Leg Panel (labeled A2) 1 B Backrest Panels 1 C Seat Panels 1 Label ① ② ③ ④ ⑤ Picture Description QTY Short Screws (M6*40mm) 4 Long Screws (M6*60mm) 4 JRN Nut 4 Allen Key 1 Screw Bit 1
PAGE 2
Before Beginning Assembly: OVERVIEW This Armchair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and t b f bl Step 1 Insert the tenon of the Seat Panel (C) to the mortise of Right Leg Panel (A1). Secure with Long Screws (②) to JRN Nut (③) with Screw Bit (⑤) and Allen key (④).
PAGE 3
Step 2 Insert each Tenon of Backrest Panel (B) to the mortise of Right Leg Panel (A1). Then attach this Panel (A1) to the Backrest Panel (B) with Short Screws (①) and Allen Key (④). Turn in Screw for positioning of panels only. LOOSELY TIGHTEN THE SCREWS, up to 80%. Step 3 Insert tenon of Backrest Panel (B) and Seat Panel(C) to the Left Leg Panel (A2). Attach this Panel (A2) to the Backrest Panel (B) and Seat Panel (C) with Short & Long Screws (① & ②) to JRN Nut (③) with Screw Bit (⑤) and Allen Key (④).
PAGE 4