Caution: You must read this before you proceed.
Before Beginning Assembly: Unpack all the parts for a clear overview. Step 1 Open the carton and place all the parts on a clean, non-marring surface. Turn table top upside down , then attach Leg Panel (B) to the Table Top(A) using Bolt(E) and Washer(F) with Allen Key(D) as shown in the picture above. Repeat this process with the other Leg Panel (B) Only Loosely tighten the Bolts.
Step 2 Attach Leg Support Panel(C) between Leg Panels(B) using Bolt(E) and Washer(F) with Allen Key(D) as shown in the picture above. Repeat the same process to affix the another Leg Support Panel(C) Only Loosely tighten the Bolts. Step 3 If wobble Test again 30CM~50CM Place the table on a LEVEL SURFACE to check for wobbles. If it wobbles,with 2 to 3 adult partners, lift the table to some 20cm to 30cm height from the ground. Keep your feet and toes well away from the drop zone.