Caution : You must read this before you proceed Push Back Chair Label Picture Description QTY A Chair Backrest 1 B Chair Base with Footrest 1 Page -4105 OF 8
C Front Leg 2 D Hind Leg 2 Description QTY Gasket 7 Label ① Picture Before Beginning Assembly: Page -4104 OF 8
Parts Introduction Chair Backrest(A) Chair Base with Footrest(B) Hind Leg(D) FRONT FACING Front Leg(C) This Push Back Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 A A Velcro B Take out the Chair Backrest(A) from Chair Base with Footrest(B).
Step 2 Chair Base(B) ① D C Non-woven Bag Turn the Chair Base with Footrest(B) upside down on a clean, non-marring surface. Open the non-woven bag and take out the Legs and Gaskets. Step 3 Legs:Bevelled plane inside facing D C ① ① B Install the Front Leg(C) at the bottom of the Chair by placing one Gasket① on the threaded stem. Then insert threaded stem into the mounting postion at the corner of the Chair. Tighten by turning the Leg clockwise, Do not over tighten.
Step 4 A A B Velcro Velcro B D C C D With assistance from your adult partner, hold up the fully assembled backrest , stand behind the chair. Insert the small metal arms on the sides of the Chair Backrest into the prefabricated slide lock gadget on the Chair Base as shown above. Firmly but gently, push the Chair Backrest downwards until the Backrest is fully slotted and locked into position. Step 5 Velcro Smooth down the fabric flap on the Chair Backrest(A).
Step 7 A A Velcro B Velcro B D D C Disassembly Note:Open the flap on the Chair Backrest(A),use a screwdriver(Don't use fingers) pressing outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(B),with assistance of you adult partner to keep the Chair Base(B) in place, pull out the Chair Backrest(A) upward at the same time,repeat the same step for another side.Then the Chair Backrest(A) can be taken out. User Instructions.
To get into a open position - To push the Chair Backrest Sit into the seat. Place your feet apart . Place your left and right arm onto the armrest. Synchronise a backward push with your arms. Use your body weight and push backwards into the seat into a fully reclined position. To get out of chair - move Seatback into Upright Position Tilt your body weight slightly forward and upwards. The seat back will come up to an upright position. Use your feet to push the footrest down.
Page -4098 OF 8
