Instructions / Assembly

Step 2

Step 3

Turn the Chair Base with Footrest(B) upside down on a clean, non-marring

surface.

Open the non-woven bag and take out the Legs and Gaskets.

Install the Front Leg(C) at the bottom of the Chair by placing one Gasket① on

the threaded stem.

Then insert threaded stem into the mounting postion at the corner of the Chair.

Tighten by turning the Leg clockwise, Do not over tighten.

Repeat the same process to install the remaining three Legs.

Take care of the shape of the Legs and ensure they are in the correct postions.

Note: The use of Gaskets are OPTIONAL and are especially useful to help

alleviate slight wobbleness. Some Legs may need more than one gasket

whilst some legs may not need any.

Chair Base(B)

Non-woven Bag

①

Legs:Bevelled

planeinside

facing

①

Page -4102 OF 8