Caution : You must read this before you proceed Chair Label Description QTY A Seat 1 B Leg 4 C Cushion 1 Description QTY ① Allen Key 1 ② Bolt (M6*16) 13 ③ Washer 13 Label Picture Picture
Before Beginning Assembly: Overview Seat (A) Cushion (C) Leg (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Align the Chair Leg(B) with mounting positions on the base of the Seat(A) Attach Chair Leg(B) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the picture. Do not fully tighten the Bolts. Step 3 Repeat the same assembly process for the remaining three Legs. Do not fully tighten the Bolts. Step 4 Place the Chair on a LEVEL SURFACE to check for wobbles. If it wobbles, apply steady and even pressure down on the Chair with the help of an adult partner.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
Caution : You must read this before you proceed Coffee Table Label Description QTY A Woven Table Top 1 B Table Leg 3 Description QTY ① Allen Key 1 ② Bolt (M6*16) 10 ③ Washer 10 Label Picture Picture
Before Beginning Assembly: Overview Woven Table Top(A) Leg (B) FRONT FACING This Coffee Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Coffee Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Align the Table Leg(B) with mounting positions on the base of the Seat(A) Attach Table Leg(B) to Woven Table Top(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the picture. Do not fully tighten the Bolts. Step 3 Repeat the same assembly process for the remaining two Legs. Do not fully tighten the Bolts. Step 4 Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, apply steady and even pressure down on the Table.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
