Caution: You must read this before you proceed Single Chair Label Description QTY A Right Armrest 1 B Left Armrest 1 C Chair Seat 1 D Chair Back 1 E Back Cushion 1 F Seat Cushion 1 Description QTY Label Picture Picture 1 OF 6
➀ Allen Key 1 ➁ Bolt (M6*30mm) 7 ➂ Bolt (M6*40mm) 6 ➃ Bolt (M6*95mm) 3 ➄ Washer 14 ➅ PE Cap 3 Before Beginning Assembly: OVERVIEW Chair Back(D) Back Cushion(E) Left Armrest(B) Seat Cushion (F) Right Armrest(A) Chair Seat(C) FRONT FACING 2 OF 6
This Single Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Single Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Left Armrest(B) facing up. Step 1.
Step 3 Place the Single Chair as shown in the picture above. Align the mounting positions of the Left Armrest(B) onto the Chair Back(D). Attach Left Armrest(B) and using Bolt(➃) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. Step 4 Step 4.6) Attach Right Armrest(A) to the Chair Seat(C) and Chair Back(D) using Bolt(➂) and Washer(➄) with Allen Key(➀). Step 4.7) Attach Right Armrest(A) to the Chair Seat(C) and Chair Back(D) using Bolt(➁) and Washer(➄) with Allen Key(➀).
Step 5 Place the Single Chair as shown in the picture above. Align the mounting positions of the Right Armrest(A) onto the Chair Back(D). Attach Right Armrest(A) and Chair Back(D) using Bolt(➃) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. Step 6 Turn the Single Chair right side up. Place the Single Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently sit on the Single Chair. This will help to align all parts at all joints.
OF 6
Caution: You must read this before you proceed Loveseat Label Picture Description QTY A Right Armrest 1 B Left Armrest 1 C Chair Seat 1 D Chair Back 1 E Back Cushion 2 F Seat Cushion 2 1 OF 8
Label Picture Description QTY ➀ Allen Key 1 ➁ Bolt (M6*30mm) Bolt (M6*40mm) Bolt (M6*95mm) ➂ ➃ 7 8 3 ➄ Washer 16 ➅ PE Cap 3 Before Beginning Assembly: 2 OF 8
OVERVIEW Back Cushion(E) Left Armrest(B) Chair Back(D) Right Armrest(A) Chair Seat(C) Seat Cushion (F) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface. Hold the Chair Seat (C )up and align the mounting positions to the Left Armrest(B) . Step(1-1) Attach Chair Seat(C) to Left Armrest(B) using Bolt(➁) and Washer(➄) with Allen Key(➀). Step(1-2) Attach Chair Seat(C) to Left Armrest(B) using Bolt(➂) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. ATTENTION: There may be some PE wicker that may have covered the Bolt points.
Step 3 Place the Loveseat as shown in the picture above. Align the mounting positions of the Left Armrest(B) onto the Chair Back(D). Attach Left Armrest(B) and Chair Back(D) using Bolt(➃) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts.
Step4-6,7) Attach Right Armrest(A) to the Right Armrest(B) and Chair Back(D) using Bolt(➂) and Washer(➄) with Allen Key(➀). Step4-8,9,10) Attach Right Armrest(A) to the Right Armrest(B) and Chair Back(D) using Bolt(➁) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. Step 5 Place the Loveseat as shown in the picture above. Align the mounting positions of the Right Armrest(A) onto the Chair Back(D). Attach Right Armrest(A) and Chair Back(D) using Bolt(➃) and Washer(➄) with Allen Key(➀).
Turn the Loveseat right side up. Place the Loveseat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently sit on the Loveseat. This will help to align all parts at all joints. Then carefully get off the Loveseat, and in a sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution: You must read this before you proceed. Table CAUTION : This Table is NOT a TOY. Keep your child / children at bay during the assembly process.
Label Picture Description QTY ➀ Allen Key 1 ➁ Washer 13 ➂ Bolt (M6*15mm) 13 Before Beginning Assembly: 2 OF 5
Overview Table Top(A) Glass (C) Leg (B) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts onto a clean, non-marring surface. It is recommended that you have a partner to assist with the assembly process.
Step 2 Turn this Table right way up.Place the table on a LEVEL SURFACE to check for wobbles. If it wobbles,lift the table to some 20cm to 30cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the table freely and vertically with all four legs, hitting the ground, all at the same time. This Drop Test will help to ensure that all the Bolts and gaps all reach full alignment status. Test again for evenness on a LEVEL SURFACE.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.