CAUTION: You must read this before you proceed. ARMLESS CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Description Qty A Backrest Panel 1 B Left Panel (With Preinstalled Levellers) 1 C Right Panel (With Preinstalled Levellers) 1 D Seat Panel 1 E Support Bar 1 F Seat Cushion 1 G Back Cushion 1 Description Qty No. No.
Before Beginning Assembly: OVERVIEW Back Cushion (G) Backrest Panel (A) Right Panel (C) Left Arm Panel (B) Seat Panel (D) Seat Cushion (F) Support Bar (E) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 Step 2.2 Step 2.1 Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C) as shown above. Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③). Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts (①) and Allen Key (③). DO NOT FULLY TIGHTHEN BOLTS. Step 3 Step 3.
With the help of your adult partner, place Left Arm Panel (B) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 3.1: Align the dowels of Support Bar (E) of the assemble in step 2 into the positions in the Left Arm Panel (B). Then, affix Support Bar (E) with Left Arm Panel (B) by using Bolt (①) and Allen Key (③). Step 3.
Step 4 Attach the Seat Panel (D) into the Chair as shown above. Affix Seat Panel (D) with Corner Chair by using Screws (②) and Allen Key (③). Note: Using Screws (②) from inside to outside of Seat Panel (D) DO NOT FULLY TIGHTHEN SCREWS. Step 5 Adjust Pre-installed Levellers height for balance Inspect the Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints.
Step 6 Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D). Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. The Chair is ready to be used. Caution: This Chair can only be used on a flat, level surface.
Step 7 Note: This is optional step in case we want to connect all chairs in a set together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and using pre-fixed clip to connect the chairs together Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
