Assembly Instructions Caution : You must read this before you proceed. Oval Table CAUTION : This table is NOT a TOY. Keep your child / children at bay in the process of assembly.
Assembly Preparation Before Beginning Assembly: Parts list Description QTY A Table Top 1 B Legs Support Panel (Long side) 2 C Legs Support Panel (Short side) 2 D Legs with pre-attached Leveller 4 Studs(M8*30mm) 5 Washers(8mm) 13 Spring washers(8mm) 13 Nut(8mm) 13 G Spanner 1 H Screwdriver 1 NO.
Assembly Step Unpack and place all parts on a clean soft surface. Place the Table Underside, underside facing skywards. Fix the Studs(E) into the table top(A) with the Screwdriver(H). Then place and fit the Four Table Legs (D) over the bolts fitting on the table top(A) using Washers , Spring Washers and Nuts((F) with the Spanner(G) . DO NOT over tighten, yet.
NOTE : To HOLD the legs together in positon, the LONG and SHORT LEGS SUPPORT PANELS WILL OVERLAP AT ALL 04 (four) CORNERs. Proceed to affix the Long and Short Legs Support Panels (B&C) to the table legs with the Washers and Spring Washers and Nuts((F). Do not over tighten. Repeat the same process for all 04 (four) contact points of the Table Legs and the Legs Support Panels. Once all the panels are in place, proceed to tighten the screw-bolts of the legs, in a rotational sequential manner.
OF 5
