Assembly Instructions Caution: You must read this before you proceed ROCKING LOVESEAT Caution: This Rocking Loveseat is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Rocking Loveseat and to prevent damage to the Rocking Loveseat, 02 persons may be needed to execute this action.
Parts List Label Picture Description QTY A Backrest Panel 1 B Seat Panel 1 C Left Leg Panel 1 D Right Leg Panel 1 E Leg Support Bar 1 Description QTY Hardware Label ① ② ③ Picture Screw (M6*80mm) Screw (M6*65mm) Allen Key Noble House Home Furnishings LLC 7 5 1 Page 2 of 9
Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 of 9
Assembly Steps Overview Backrest Panel (A) Right Leg Panel (D) Seat Panel (B) Left Leg Panel (C) Leg Support Bar (E) FRONT FACING This Rocking Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Rocking Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 3 1 D B With the help from your assistance, place the Seat Panel (B) with its one side face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Align the tenon of Seat Panel (B) into the Mortise of Right Leg Panel (D) as shown above. Then, affix the Seat Panel (B) with Right Leg Panel (D) by using Screws (①) and Allen Key (③). DO NOT FULLY TIGHTHEN SCREWS.
Step 3 C 1 3 B With the help from your partner, place the assembled part on step 2 to the Left Leg Panel (C) as shown in picture above. Align the tenon of Seat Panel (B) into the Mortise of Left Leg Panel (C) as shown above. Then, affix the Seat Panel (B) with Left Leg Panel (C) by using Screws (①) and Allen Key (③). Do not fully tighten the Screws.
Step 4 E C 3 1 D Attach the Leg Support Bar (E) to the Right Leg Panel (D) and Left Leg Panel (C) by using Screws(①) with Allen Key(③). You may need to apply a little pressure to enable align the tenon of Leg Support Bar (E) into the Mortise of Left Leg Panel (C) and Right Leg Panel (D). Do not fully tighten the Screws. Step 5 A 2 3 With the help from your partner, turn the finished part in step 5 right side up.
Step 6 Place the Rocking Loveseat on a LEVEL SURFACE. Inspect the Rocking Loveseat and make sure all parts are connected. Gently and gracefully, sit into to the Rocking Loveseat. This would help to align all the parts at all the joint areas. Then get off the Rocking Loveseat and in a sequential manner, proceed to tighten all Screws. Whenever moving or lifting the Rocking Loveseat be sure to secure assistance from your adult partner(s). When tightening the Bolts and Screws, tighten sequentially.
Noble House Home Furnishings LLC Page 9 of 9
