CAUTION: You must read this before you proceed. Please look in the Seat Panel for hardware packs. RIGHT CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Description Qty A Backrest Panel 1 B Left Arm Panel(With Preinstalled Levellers) 1 C Right Arm Panel(With Preinstalled Levellers) 1 D Seat Panel 1 E Support Bar 1 F Seat Cushion 1 G Back Cushion 1 H Right Back Cushion 1 Description Qty No. No.
Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished. Backrest Panel (A) OVERVIEW Right Back Cushion (H) Back Cushion (G) Seat Cushion (F) Right Arm Panel (C) Left Arm Panel (B) FRONT FACING Seat Panel (D) Support Bar (E) This Right Chair has multiple parts and may require up to 30 minutes to assemble.
Step 2 Step 2.1 Step 2.2 Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C) as shown above. Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③) Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts (①) and Allen Key (③) as shown above. DO NOT FULLY TIGHTHEN BOLTS.
Step 4 A B With the help of your adult partner,place the assembled in Step 3 right side up as shown above. By hand, hold Left Arm Panel (B) and Backrest Panel (A) together tightly then secure the Left Arm Panel (B) and Backrest Panel (A) by using Bolts (①) and Allen Key (③) as shown above. Step 5 Attach the Seat Panel (D) into the Right Chair as shown in picture above. Affix Seat Panel (D) with Corner Chair by using Screws (②) and Allen Key (③).
Step 6 Adjust Pre-installed Levellers height for balance Inspect the Right Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints. With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles. Step 7 Turn the Right Chair right side up. Place Seat Cushion (F), Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D). Inspect it and make sure all parts are adequately connected.
Step 8 Note: This is optional step in case we want to connect all chairs in a set together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and using prefixed clip to connect the chairs together Noble House Home Furnishings LLC 7 of 8
Noble House Home Furnishings LLC 8 of 8