Instructions / Assembly

ManualsBrandsNoble House ManualsOutdoor Lounge FurnitureOana Grey 4-Piece Wood Outdoor Sectional Set with Dark Grey Cushions

CORNER CHAIR

CAUTION: You must read this before you proceed.

CAUTION : This Corner chair is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Corner chair and to prevent damage to the Corner

chair, 02 persons may be needed to execute this action.

Summary of content (7 pages)

PAGE 1
CORNER CHAIR CAUTION: You must read this before you proceed. CAUTION : This Corner chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Corner chair and to prevent damage to the Corner chair, 02 persons may be needed to execute this action.
PAGE 2
Description Qty A Backrest Panel 1 B Left Arm Panel 1 C Right Arm Panel 1 D Seat Panel 1 E Support Bar 1 F Seat Cushion 1 G Left Back Cushion 1 H Right Back Cushion 1 Description Qty Bolts (M6x35mm) 7 Screws (M6x35mm) 5 Allen Key 1 No. No.
PAGE 3
Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished. OVERVIEW Backrest Panel (A) Right Arm Panel (C) Left Back Cushion (G) Right Back Cushion (H) Left Arm Panel (B) Seat Cushion (F) Seat Panel (D) Support Bar (E) FRONT FACING This Cornerchair has multiple parts and may require up to 30 minutes to assemble.
PAGE 4
Step 2 Step 2.1 Step 2.2 Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C). Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③).. Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts (①) and Allen Key (③). DO NOT FULLY TIGHTHEN BOLTS. Step 3 Step 3.1 Step 3.
PAGE 5
Step 4 Attach the Seat Panel (D) into the Corner Chair as shown in picture above. Affix Seat Panel (D) with Corner Chair by using Screws (②) and Allen Key (③). Note: Using Screws (②) from inside to outside of Seat Panel (D) DO NOT FULLY TIGHTHEN SCREWS. Step 5 Adjust Pre-installed Levellers height for balance Inspect the Corner Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints.
PAGE 6
Step 6 G H F Turn the Corner Chair right side up. Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D). Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. The Corner Chair is ready to be used. Caution: This Armchair can only be used on a flat, level surface.
PAGE 7